Durabrand Televison & Video - Answered Questions & Fixed Issues

if your Durabrand TV model ON32F6000D offers updates via USB also, Make sure the USB drive is empty and has enough space to accommodate the firmware update file. then Copy the downloaded firmware update file from your computer onto the root directory of the USB flash drive

According to the user manual you should be able to clear the code by unplugging the TV and wait about 30 minutes.
The manual is available here.

http://www.usersmanualguide.com/funai/television/dwt2405

Six AA batteries.

bad play button

It is a DVD player and VHS recorder.

What might be happening is a misread of the disk or a buffer error, these happen often, and can be fixed sometimes by cleaning the lens, cleaning and relubricating the guide rails and making sure the rubber bumper gromets are not worn down. Now these are all of the mechanical things you can do. The problem could also be a bad memory sector in the play back buffer, or a store and hold voltage could be off a bit (indication of a bad capacitor). I hope this helps.

Without its remote control, you can't select the inputs. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its user manual. Never accept a remote control, that hasn't both of this. If you see the site by "MOSAIC" view, will make surf easier. http://electrohelponline.blogspot.com/

Try website 1-800-Remotes Factory original.To buy an exact remote or very close to the original remote.

Have you recently used headphones in this device? I have a portable DVD player that had a similar problem. It thought that headphones were plugged in and that turned the sound in the external speakers off. If i plugged in headphones the sound worked in them. So I jiggled the headphone plug in while in the jack and removed it and the sound came back on.

is it from the tv no sound coming it mabe be due to faulty cable or due to the wrong connection to the tv do check the Manuel for the connection there is no problem with the dvd player

try a differnt dvd... cos may be the sound format in the dvd disc is not supported by the player... try a mp3 player.. to see if sounds available..

have you tried a cleaning disk and make sure the movie disks have no finger prints on them that will stop it from loading.

there might be dust on the lens. try cleaning both the lens and dvd itself.

my Portable DVD Player just stop playing movies. i put a movie on and it want read or it will start the movie snd just stop and want play no more

Check and make sure the laser eye is clean and clear of dust and smudges. With player OFF, blow across laser eye. Try cleaning with soft dry Qtip. Otherwise you probably have a bad laser drive or bad drive ribbon cable.

tengo un control remoto RCA deseo programarlo a un TV durabrand q codigo debo usar ?????

simple some actaully most portable dvd players just arent made to play copys or duplicates becaues they do not have the software for that kind of disc. so they instead can only play origanals dont worry my portable dvd player does this too

I searched using Google and Duckduckgo and could not locate a manual. I saw the following discussion from 11 years ago that might have some information to assist. https://forums.digitalspy.com/discussion/875268/durabrand-dpvr801-50-asda

Hi Melvin, if you can download the firmware to a USB memory, empty it and install it on the TV You have to find the firmware update, according to the model of your TV I hope I can solve the problem Greetings Franco Dosil Hola Melvin, si puedes descargar el Firmware en una memoria USB, vac?a, e instalarlo en el televisor Tienes que encontrar la actualizaci?n del Firmware, acorde del modelo de tu televisor Espero pueda resolver el problema Saludos Franco Dosil