Hi Angela
This error is related to the Yellow charger that sets on the yellow drum, it might be out of position or defective, I would try to reset this error first to see if it goes away if it does not work you might need to replace that part.
Reset Kyocera error code:
1. On the Operation Panel of the Kyocera MFP Enter Simulation Mode. Simulation Mode is accessed by pressing 10871087 on the number keypad.
2. Enter Simulation 906 Reset and Press the Green Start Button. The MFP will ask you to turn the main switch OFF/ON
3. The main switch is located on the right side of the device next to the power outlet.
Try that and let me know!
Good Luck
use the new mac driver for any black and white machine it will work. the new driver i think is 3.0.
www.copystar.com I’m happy to help further over the phone at https://www.6ya.com/expert/mustafa_06f84c65ab5cc745
it is under mode 21, you need to login first to maintenance mode by punching the numbers 1087 1087. then select the number 21 then hit start. you will be able to clear the memory . I’m happy to help further over the phone at https://www.6ya.com/expert/mustafa_06f84c65ab5cc745