Irons - Page 4 - Answered Questions & Fixed Issues

I'm sorry to hear that you're having trouble with your Miele rotary iron B865. There could be a few different reasons why the slot won't open up and the iron won't rotate. First, make sure that you've followed the instructions in the user manual for operating the rotary iron. Check that the iron is securely plugged in and turned on, and that you're using the correct temperature setting for the type of fabric you're ironing. If the iron still won't rotate, there may be a problem with the motor or the mechanical components of the iron. You could try unplugging the iron and checking for any obstructions or debris that might be preventing the iron from rotating. If you're comfortable doing so, you could also try opening up the iron and inspecting the mechanical components for any signs of damage or wear. If you're unable to identify the issue on your own, I would recommend contacting Miele customer service or a professional repair technician for further assistance. They will be able to help you troubleshoot the problem and determine the best course of action to get your rotary iron working properly again.

1. Check the power supply: Make sure that the iron is properly plugged in and that the outlet is working. If the outlet is not working, try plugging the iron into a different outlet.
2. Check the temperature setting: Make sure that the temperature setting on the iron is set correctly for the type of fabric you are ironing. If the temperature is set too low, the iron may not heat up properly.
3. Check for mineral buildup: If the iron has not been descaled recently, mineral buildup in the steam chamber could be causing the heating element to malfunction. Try descaling the iron following the manufacturer's instructions.
4. Check the heating element: If the heating element is damaged or has burned out, the iron will not heat up. In this case, the iron may need to be repaired or replaced.

It looks like it might be a special model for sale on Amazon. Pick one that looks the same. They all word alike. Plug in, control the heat, press the button for extra steam. https://www.amazon.in/Black-Decker-AS975-First-Impressions/dp/B0000ASAXR Unbranded 'First Impressions' iron and manual https://www.blackanddeckerappliances.com/products/garment-care/compact-irons/f210-variable-steam-iron.aspx https://www.google.com/search?q=Black+%26+Decker+AS975+steam+iron+manual

Repair ideas in the link. Some have a 10 year warranty. https://www.google.com/search?q=Tefal+FV9788+repair

bring back if brand new

Most steam irons can be cleaned deposits by emptying the water and replacing with white vinegar. Let it heat up and use the iron as normal - but on cloth rags instead of clothing. The vinegar breaks down and dissolves the mineral deposits inside that are responsible for sputtering and stains. You can reduce or even eliminate these deposits from forming by using distilled water instead of tap water in the iron - otherwise - run vinegar thru it when it starts acting up. The vinegar "trick" works great on coffee makers, too.

How bad is this Scratch? Small light scratches will have no effect on what your ironing. Large, deep scratches are only a problem if they are over a steam jet hole. This can blow steam in the wrong direction which isn't safe. For bad scratches it is often better to replace the iron.

There are a few possible causes for your Tefal iron cutting out after about 10 minutes of use:

1. Overheating: The iron may be overheating and shutting off as a safety measure. This could be caused by a clogged steam vent or a malfunctioning heating element.
2. Electrical issues: The iron may be experiencing electrical issues, such as a faulty power cord or a problem with the outlet.
3. Water leaks: If the iron is leaking water, it could be causing the iron to shut off. Check for any visible leaks and make sure the water tank is properly sealed.
4. Malfunctioning thermostat: The iron's thermostat may be malfunctioning, causing it to shut off unexpectedly.

There are a few things you can try to fix your Rival Shot Of Steam Iron ES280 if the indicator light is not coming on and it is not heating up:

1. Check the power source - Make sure the iron is properly plugged in and that the outlet is working.
2. Check the temperature setting - Make sure the temperature setting is appropriate for the type of fabric you are ironing. If the setting is too low, the iron may not heat up.
3. Check the cord and plug - Make sure the cord is not damaged and that the plug is properly connected to the outlet.
4. Check the fuse or circuit breaker - If the fuse or circuit breaker has tripped, the iron may not be receiving power.
5. Reset the iron - You can try resetting the iron by unplugging it from the wall and plug

here are the possible solutions: 1.loose wire inside the iron2. damaged power cord3. faulty power source4. faulty electric board/ circuitand I found more on solutions on...https://pakcentric.com/why-does-my-straightener-keep-turning-off/these was really helpful to me.

To replace the cord on an iron, you will need to:

1. Unplug the iron: Make sure the iron is unplugged and cooled down before attempting to replace the cord.
2. Remove the cord from the iron: Depending on the model of your iron, you may need to remove a cover or panel to access the cord. Look for any screws or clips that hold the cover in place and remove them using a screwdriver. Once the cover is removed, you should be able to see the cord and the connections to the iron.
3. Disconnect the cord: Use a pair of pliers or a wire stripper to carefully remove the wire connectors from the cord. Be sure to hold onto the wire connectors so you do not lose them.
4. Attach the new cord: Follow the steps above in reverse to attach the new cord to the iron. Strip the ends of the wires on the new cord and attach them to the wire connectors. Be sure to connect the wires according to the correct polarity (i.e., positive to positive, negative to negative).
5. Replace the cover: Once the new cord is attached, replace the cover and secure it with the screws or clips you removed earlier.
6. Test the iron: Plug in the iron and test it to make sure it is functioning properly.

If you are not comfortable or experienced in electrical repairs, it is recommended to have a professional perform the cord replacement. Tampering with the electrical components of an appliance can be dangerous and can cause damage to the appliance or injury to the user.

It sounds like your even-tempered iron is in a bad temper! I can think of no reason that you couldn't pull the plug from the wall socket. There is no iron of that model name, so I am puzzled by whole thing in your 'Anonymous' post. Disconnect the power at the breaker. Cut the wire with side cutters and throw the iron in the bin. Remove the wall socket from the wall and replace with a new one and throw that in the bin as well. Buy a new Rowenta next time. https://www.google.com/search?q=black+decker+even-tempered+iron ..

Error code 021 on a Turboion Croc Classic flat iron indicates a problem with the temperature sensor. This error can prevent the flat iron from heating up properly and may cause it to shut off unexpectedly. To fix this issue, you can try the following steps:

1. Turn off the flat iron and unplug it from the power outlet.
2. Use a small screwdriver to open the back cover of the flat iron and locate the temperature sensor.
3. Carefully inspect the temperature sensor for any signs of damage, such as bent or broken wires, loose connections, or burnt components.
4. If you notice any damage to the temperature sensor, you will need to replace it with a new one. You can purchase a replacement temperature sensor from Turboion or from a third-party supplier.
5. Once you have installed the new temperature sensor, reassemble the flat iron and plug it in. Turn it on and check if the error code 021 is still appearing.
6. If the error code persists, you may need to contact Turboion customer support for further assistance. They will be able to provide you with more detailed troubleshooting steps and help you resolve the issue.

For dishwasher repair services in dubai call 045864033 . Because my friend suggest me this service and I service . Now I am satisfied their work . You should try at least once .

limited info generic answer can be : failed switch--element--broken /damaged wire --sensor

not worth fixing

Hi,
Here is a tip that will help you with that problem...

Cleaning a Steam Iron Soleplate
http://www.fixya.com/support/r5301167-cleaning_steam_iron_soleplate

heatman101

I need to know how to pull the handle is in stuck posion

It will be a Security Screw Nancy. There are a few different types, Torx is the most common, but others have a triangular slot and are popular on domestic irons. You need a set of security screwdrivers or screwdriver bits. Or you can take the iron down to Home Depot and ask someone in the tool department.Tool to disassemble Black & Decker Digital Advantage Iron...