Ice Cream Makers - Popular Questions, Answers, Tips & Manuals

1helpful
1answer

Taylor C713 Blower Fan will not turn off, stays on all the time

a few potential causes and solutions you can explore: Low Mix Level: Problem: The MIX OUT light is on, indicating that the mix level is low. Remedy: Add more mix to the mix hopper and return the machine to AUTO mode. Power Switch Position: Problem: The power switch might be in the OFF position. Remedy: Ensure that the power switch is set to ON and select AUTO mode. Machine Not in AUTO Mode: Problem: The machine might not be in AUTO mode. Remedy: Select AUTO mode and allow the machine to cycle off before drawing product. Beater Motor Reset: Problem: The beater motor might be out of reset, and the BEATER OVERLOAD message is displayed. Remedy: Turn the machine off, press the reset button, and restart it in AUTO mode. Freeze-Up or Blockage: Problem: There could be a freeze-up in the mix inlet hole or an issue with the feed tube. Remedy: Call an authorized service technician to address the issu
3/16/2024 2:34:57 PM • Taylor Ice Cream... • 21 views • 1 helpful votes
0helpful
1answer

Rival 8420 : Electric Ice Cream Maker. The motor only hums.

Question edited for clarity. Question moved from Cars and Trucks category. Humming normally means the start / run capacitor on the motor has failed and needs replacing. Or something is jammed, but unlikely. https://www.google.com/search?q=Rival+8420+motor+hums ..
11/24/2023 12:06:37 AM • Rival 8420-TB 4... • 38 views • 0 helpful votes
0helpful
1answer

I NEED A HB1114 ICE CREAM MACHINE MANUAL

https://www.manualslib.com/i/ichb1114e+cream+maker.html Try this site. Let me know if it works.
12/4/2023 12:19:27 AM • Ice Cream Makers • 29 views • 0 helpful votes
0helpful
1answer

We have a Taylor 754-27 ice cream machine. Worked fine. Changed out all gaskets, seals o- rings. Left side now will freeze in the tub, but will not freeze in the barrel. Any ideas.

If the left side of your Taylor 754-27 ice cream machine is freezing in the tub but not in the barrel, there could be a few potential issues to consider. Here are some possible causes and troubleshooting steps: 1. Insufficient refrigerant flow: Check if the refrigerant flow is restricted or inadequate, which can prevent proper freezing in the barrel. Ensure that the refrigerant lines and valves are clear and not blocked or clogged. You may need to clean or replace any filters or strainers in the refrigerant system. 2. Temperature control malfunction: Verify that the temperature control settings are correct for the barrel freezing process. The control thermostat may be faulty and need replacement. Check the temperature sensor and wiring connections to ensure they are in good condition. 3. Insulation problems: Examine the insulation surrounding the barrel to ensure it is intact and properly insulating. Insufficient insulation can lead to the barrel not freezing as expected. If the insulation is damaged, replace it with appropriate insulation materials. 4. Barrel motor or drive system issues: If the barrel is not rotating properly, it may result in inadequate freezing. Check the motor and drive components responsible for rotating the barrel. Look for any signs of wear or damage and ensure they are functioning correctly. Lubricate the drive system if necessary. 5. Refrigeration system malfunction: A problem with the compressor, condenser, or evaporator can impact the freezing process. Inspect these components for any signs of malfunction, such as unusual noises, leaks, or inadequate cooling. If any issues are found, it is advisable to contact a professional refrigeration technician for repair or servicing. 6. Improper assembly or installation: Double-check the gaskets, seals, and o-rings that were replaced during maintenance. Ensure they are properly installed and creating a tight seal. Any gaps or leaks in these components can affect freezing performance. If you have attempted these troubleshooting steps and the issue persists, it is recommended to contact a professional technician who specializes in Taylor ice cream machines. They will have the expertise to diagnose and repair the specific problem with your equipment. Might help
5/22/2023 12:22:23 AM • Taylor Ice Cream... • 175 views • 0 helpful votes
0helpful
1answer

What is the black liquid draining into the ice-cream canister from the motor while making? And is it still safe to eat?

No make and model provided but.... Of course it isn't safe to eat!! It is likely a mixture of oil, broken seal dust and a little metal/rust creamed with a drop of condensation. 50 years as as a chef and I wouldn't serve that or eat it. Fix it or thrown the machine away! These machines are normally 20 years old and get used 3 times every 2 years.
7/4/2023 7:48:54 PM • Ice Cream Makers • 52 views • 0 helpful votes
0helpful
1answer

Taylor C713 Soft Serve Freezer air cooled. HPCO reading?

Question edited for clarity and typo. Question moved from Taylor Beauty Products. Not sure what 'HPCO' is. This site doesn't do well on abbreviations https://www.google.com/search?q=taylor+air+cooled+713+hpco+reading .
3/1/2023 5:21:37 AM • Taylor Ice Cream... • 260 views • 0 helpful votes
0helpful
1answer

Ice cream maker freezes and stops turning after only 20 minutes. I set the time for 60 minutes.

If your ice cream maker freezes and stops turning after only 20 minutes, there may be a few reasons for this. Here are some things to check: Freezing temperature: Make sure that the temperature in your freezer is set to the correct temperature (around 0°F or -18°C). If the freezer is too warm, the ice cream maker may not freeze the mixture properly. Mixture consistency: Make sure that the mixture you are using is not too thick. If the mixture is too thick, the ice cream maker may struggle to turn the mixture and freeze it properly. Overfilling: Make sure that you are not overfilling the ice cream maker. Overfilling can cause the mixture to overflow and prevent the machine from freezing the mixture properly. Motor issue: If none of the above solutions work, there may be an issue with the motor of the ice cream maker. In this case, you may need to contact the manufacturer or a professional repair service to diagnose and fix the problem. As for turning on the furnace and power in your Hitchhiker II trailer, you may need to refer to the owner's manual or contact the manufacturer for specific instructions, as the process may vary depending on the model and year of your trailer.
2/21/2023 7:22:40 PM • Ice Cream Makers • 187 views • 0 helpful votes
0helpful
1answer

How to remove Mixing canister stuck inside of Sunbeam Soft Serve Ice Cream & Frozen Yogurt Machine

In order to remove the mixing canister stuck inside of a Sunbeam Soft Serve Ice Cream & Frozen Yogurt Machine, you will need to unplug the appliance and turn it upside down. Then, use a flathead screwdriver to gently pry the canister away from the wall of the machine. Once the canister is loose, you can remove it from the appliance.
2/4/2023 8:44:14 PM • Sunbeam Ice... • 45 views • 0 helpful votes
0helpful
1answer

Anyone to help me with manual for Beiqi ice cream machine (model BQ323PA)

It appears to be a South African machine, so this link might work better for you than me in North America. https://www.google.com/search?q=Beiqi+BQ323PA+manual ..
10/4/2022 11:03:06 PM • Ice Cream Makers • 170 views • 0 helpful votes
1helpful
1answer
0helpful
1answer

How can I replace the fuse 16A 250V in my Buffalo Icecream maker ?

I have no idea. Are you an electrical engineer ..............
10/22/2022 7:06:26 AM • Ice Cream Makers • 44 views • 0 helpful votes
1helpful
1answer

Taylor 754 soft serve ice cream machine. Why is it taking a long time to freeze?

Clean the condenser fins of dust and fluff. It may need a top up of refrigerant gas.
8/23/2022 1:54:27 AM • Taylor Ice Cream... • 151 views • 1 helpful votes
0helpful
1answer

Is cream charger necessary for making coffee?

There is no substitute for a cream whipper when it comes to making foams, sauces, and freshly whipped cream. These sealed canisters whip up whipped cream of the highest caliber in a matter of seconds by forcing air into the cream using compressed gas. These instruments are necessary for caf?s, bakeries, restaurants, and more since they let you to make a variety of desserts, milkshakes, fresh cakes, pastries, and cream infusions. However, how can you maximize the potential of your cream whipper? Cream whippers, which are most known for creating whipped cream that maintains its shape and texture, can also keep foams, sauces, and mixes fresh by delaying the start of oxidation. What happens if the multipurpose kitchen appliances you rely on suddenly break down? Fortunately, most problems can be swiftly resolved, so knowing how they operate will help you improve their performance when the occasion demands it.
9/14/2022 6:01:23 AM • Ice Cream Makers • 69 views • 0 helpful votes
0helpful
1answer
0helpful
1answer

Taylor 754 Gravity soft serve ice cream machine. I changed the motor but it has 4 wires 2 black and 2 blue, I hooked up the black one it's working should I hook up the blue one if yes where?

Question edited for clarity. Question moved from Laundry Dryers. You shouldn't be playing with machines like this. Professional equipment needs professional servicing. https://www.google.com/search?q=taylor+754+replace+motor+wiring+diagram ..
8/30/2022 2:15:17 AM • Taylor 754-33... • 94 views • 0 helpful votes
0helpful
1answer

Cooks essentials 700 ml ice cream maker

limited info generic answer circuit problem -paddle connection fail--cog/gear fail -motor fail need to examine unit to narrow down problem since their many to choose from
8/1/2022 1:39:08 PM • Ice Cream Makers • 137 views • 0 helpful votes
0helpful
1answer

Instructions and recipes for Toastmaster ice cream maker

The manual is here

Toastmaster Ice creamn maker model 6701, use and care ...

https://manualzz.com > ... > Ice cream makers Toastmaster Automatic Ice Cream Maker Use and Care Guide Recipe Book Model 6701 IMPORTANT SAFEGUARDS When using electrical appliances, basic safety .. ..
7/14/2022 6:56:14 PM • Ice Cream Makers • 106 views • 0 helpful votes
0helpful
1answer

The timer on my Cuisinart ice cream machine won't beep anymore at the end of the cycle

Your washing machine turned into an Ice Cream Maker! Try a Power Reset. Sometimes it is as easy as disconnecting from the mains supply for 5 minutes and plugging back in. Some models use a number of keys, press and hold. Google make model reset gives this

Frozen Yogurt-Sorbet & Ice Cream Maker - Cuisinart

https://www.cuisinart.ca > en_CA > ICE-30WNC_en PDF To reset the unit, turn the ON/OFF switch to the OFF position. Let the unit cool off. After a few minutes, you may turn the unit on again and continue making ...
It may be that the sound sender device is faulty, or even a main control board issue. No one else has encountered your issue. https://www.google.com/search?q=Cuisinart+ice+cream+doesn%27t+beep ..
7/17/2022 3:23:00 PM • Cuisinart Ice... • 87 views • 0 helpful votes
0helpful
1answer

Can anyone help me get my Taylor 150 Ice Cream machine started please?

If it was fine before stored away, then either the power is not getting to the machine, (rodent damage or corroded contacts) or there is a control fault.
7/16/2022 9:41:40 AM • Ice Cream Makers • 81 views • 0 helpful votes
Not finding what you are looking for?
Ice Cream Makers Logo

1,923 questions posted

Ask a Question

Usually answered in minutes!

Top Ice Cream Makers Experts

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66977 Answers

Don A
Don A

Level 3 Expert

4499 Answers

Are you an Ice Cream Maker Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...