Questions & Answers for: wheel nut mobility scooter

wheel should be held on by 1 nut (or maybe bolt) in the centre of the wheel so in your case it sounds like its inderneath a centre cover. The allen key studs on the outside of the wheel (probably 4 of

What is the torque value for the axle nut on the rear wheel of a Pride Legend 4-wheel Mobility Scooter? Thanks. mcdevito75 here, I would figure 20 lbs.

...I REMOVE A TYRE FROM A MOBILITY SCOOTER IT HAS A FLAT TYRE AND I DONT HOW TO GET THE WHEEL OFF There is a nut that you will have to remove. Once the nut is off, then the wheel should slide right

...definately come off once the 1 nut is removed and if it doesnt its ageing and rust. He said what he does is turns the scooter on its side, turns the wheel hammering it until it breaks free of the ...

...nut off and really pressured the rear right wheel to come off , but it will not budge rubbish answers. He cant get the wheel off and the answer is..take the wheel off?? Cobra do you know what a full ...

noise when weight on left wheel of mobility scooter hi tighten youre axle nuts ...cheers

...Nut for attaching the wheel to the axle 4 x smaller nuts that hold the 2 sides of the wheel rim together. Remove the wheel - Deflate tyre (if not already) - Remove the 4 split rim nuts - use a blunt ...

my back wheel on the left side wobble's why my back wheel wobble's could it be bearing's Yes, or nut,e-clip,bolt loose or gone.

...nut in the middle of the wheel with either a 17mm or 19mm socket. Leave the scooter on the ground and undo in an anti-clockwise direction. Some may have a tab washer which you will need to knock back ...

...nut on your Road Knight mobility scooter's wheel won't budge, you can try the following steps to remove the wheel: Apply some penetrating oil: Spray some penetrating oil like WD-40 or PB Blaster on ...