Questions & Answers for: Honeywell wall unit

...unit into the wall, smoke and flames started coming out. It's not the wall socket because I checked the heater in other outlets and it did the same thing. Very dangerous. Good thing it happened while ...

...unit off the wall - afraid to use too much force - can't see any locking tabs previously suggested - can u help? My unit snapped off - rather hard, but it came - backing plate screwed to wall stays. ...

wall heater, vents outside, air keeps coming into the unit and blowing out the flame, how do I keep the air from getting into the unit Look in your yellow pages and call in a GAS FITTER to look at the

...wall furnace to my thermostat. if so how much out put what kind of thermostat to you have, did you purchase the thermostat with the unit are you upgrading to a electronic thermostat, If you are using ...

...unit for power as well the stat splits open from the wall leaving some of it mounted on the wall the batteries are in the part that pulls off the wall and the wires are on the part that stays on the ...

...controlls in the wall heater the second problem is t-stat location if the wall heater is near the central heats t-stat it will shut off the central to soon . maybe relocate wall unit to coldest room

...unit off the wall wouldn't break it? It came off easily enough, and goes back into place just as easily. Hi, check the wire connections to make sure the Red wire is good and tight. This is only low ...

...is the owners manual for that unit. it shows to push a button on the bottom of the unit to remove from wall plate. hope this helps. ...

the unit powers on but the temp cluster does not come on the wall plug looks deformed your wall plug needs to be replaced.

...Wall top white wire (load) --> load red. Here at home where I reside we have an old school thermostat that has the mercury bulb that acts like a sensor, and in other cases it could just be as easy as ...