Questions & Answers for: Jeep Grand Cherokee second

...it home and noticed right away that in first gear it went to around 4000 rpms before shifting into second gear. After it was in second 3rd and 4th gears were smooth. I put it into reverse and id had ...

Ad

...to the On position. (3) After the ignition switch has been in the On position for longer than three seconds, but no more than fifteen seconds, cycle the ignition switch back to the Off position. ...

Ad

Question about 1994 Grand Cherokee

1 Answer

1994 grand cherokee 4.0 starts and stalls 3 seconds later wont run more than 3 seconds replaced fuel pump but still the same turn the key in the lock on the drivers door. its ur security is turning ...

Question about 2004 Grand Cherokee

1 Answer

2004 jeep cherokee alarm won't disarm Switch ignition ON and OFF within 15 seconds. Using second programmed key, proceed as follows: Switch ignition ON and OFF within 15 seconds. Within 10 seconds: ...

Question about 2002 Grand Cherokee

1 Answer

...PROGRAM TRANSMITTERS. Program Method A (Customer Program Method) 1.Press (LOCK) button 5 times at 2 second intervals to resynchronize transmitter. Attempt to function transmitter, if working as ...

jeep won't shift out of second starts in second unless manually shift second is highest bit will go Check the nuetral safety switch sound like to me you may have problems with this a vehicle should ...

Question about 2001 Grand Cherokee

1 Answer

...is in 01 grand cherokee laurado 4.0 Here is an article I found talking about the Transmission. The second generation Grand Cherokee: 1999-2004 Jeep WJ The first Grand Cherokee was redesigned in

i have a 2000 chevy tahoe and transmission will not shift out of second gear. 2000 chevy tahoe sat for about a month. When i tried to drive the service engine soon lamp came on and transmission will ...

Question about 1993 Grand Cherokee

1 Answer

...dead or weak. 4: Immobilizer active. (failed) as the book says , make sure spark is good for the 2 seconds cranking. (not after the 2seconds) the ECU is programmed like this. user cranks. ECU

Question about 2000 Grand Cherokee

1 Answer

...8q in the FSM. page 7 , "customer method" ill see if i can paste it here, (found it in 10 seconds) quote, real FSM CUSTOMER LEARN METHOD The Customer Learn feature is only available ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...