Questions & Answers for: ro unit

...unit. noticed that the refrigerater was hooked up to water supply by a larger hose i hooked up the r.o. to the plastic line above the hose. Tuurned off the water line from the water supply and used ...

...RO unit. All too much pressure in tank will do is cause low or no product water in RO tank. Older Culligan RO systems (H8, H83, H5) had fittings that used metal locking washers and these can cut the ...

...low pressure in storage tank. A 3 gallon tank should have 7psi pressure when completely empty. Also if the unit is fed by a piercing valve it may be faulty and not supplying enough water to RO. ...

ro water at all I removed unit changed 3 pre filters and a post polisher now I gotta problem How long will this unit run to fill its 3 gal res .tank If the RO is not shutting off and there is no water

...RO Unit installed at our sink, and a line run to our Maytag fridge. The water filter is inside, at the top. We don't really need the filter anymore, as the RO water is more tha We just had a new ...

...RO unit, merely remove the RO membrane filter, and bypass it, and that would use all the other filters it has, without slowing the water flow excessively.  Also, it will, NOT take out any ...

...ro Hi, If I am not mistaken, you need to have at least 20 psi possible 35 psi for this unit to work. The new unit have smart fill valves an require min pressure to work correctly, Read the uses and ...

unit? IF you have a pump, the pressures are high entering the ro filter. If no pump they are no more than the city water. But given the age, plastic parts may be approaching their end of life. I Don't

...unit are you talking about the filter or the ice maker? It has been quite some time since the filter was changed, but the change filter lite is not on. Water is still coming out slow Fridge RO water ...