...cover at the bottom of the lever to reveal the switch. I think it's adjusted by 2 screws. Thanks. hi, check the positive and ground battery wires. there may be a break in the strand in either the ...
motor. this will fix the issue. open the hood, pop out the plastic cover over the wiper, pop out the round cap, remove the nut, pull off the wipper arm, check that the "post" under the wiper arm moves
...was the idle controll motor. Just took it off cleaned with carb cleaner,to get at it remove the thottle cover it has 2 10mm bolts holding it on and looks kinda like a solinoid with 1 plug going to
motor Removing connectors and screws holding mirror motor To install: Install or connect the following: The electric motor The electrical connections The 3 screws that go behind the mirror Install the
...motor, and you will probably need to have it looked at by a pro. good luck! the arm has come off the spindle under the bottom of the wiper drive or the nut in the middle has come loose ,lift the ...
motor or the regulater has broken. You can try to manully close the window and then push the switch to see if it'll ingage. Opening the door by removing the door panel, work the switch
Usually answered in minutes!
682 Questions
502 Questions
335 Questions
175 Questions
161 Questions