Questions & Answers for: HP PhotoSmart remove rear door cards

...rear LCD. CAUTION: Care should be used when performing Step 5 to ensure that the camera is not dropped. Open the battery door and remove the batteries with the camera turned on. Re-insert the ...

...Remove the rear access door. Locate and then roll the internal rollers in an upward direction until a clicking sound is heard. Reinstall and lock the rear access door. Connect the power adapter to a ...

...remove the rear access door to reveal the rollers.Take a slightly wet cotton cloth and wipe the rollers in the upward direction 4 times.Close the rear access door. now do as said - START -PRINTERS & ...

rear door is removed, it is wound over rear rollers. Hope someone can help as I really like this printer? Many thanks. Try this... I suggest you get a sheet of Card Stock (Heavy paper) and place it in

rear of the product. 2. Remove the cartridges from the product. 3. Wait for the 'Insert Cartridges ' message to display on the control panel. 4. Disconnect the power cord from the back of the product.

...Remove the rear access door. Locate the clutch inside the printer. NOTE: The clutch is located in the same place as pictured above in Figure 1, however, you must access it from the left, just above ...