Questions & Answers for: Jeep Grand Cherokee s position

where is the crank sensor located on a 2000 grand cherokee limited 4.0? 4.0L The Crankshaft Position Sensor (CKP) is mounted to the transmission bellhousing at the left/rear side of the engine block. ...

Ad

Question about 2000 Grand Cherokee

3 Answers

...has happened: ?a wire or connector in the circuit could be grounded/shorted/broken ?the camshaft position sensor may have failed ?the PCM may have failed ?there exists an open circuit ?the ...

Ad

Question about 2004 Grand Cherokee

1 Answer

jeep cherokee grand p 121 2004 code refers to throttle cable adjustment, throttle position sensor, throttle position switch,throttle pedal position sensor, throttle position position switch, this is ...

have a 93 jeep cherokee. Ignition is locked in the on position, will not crank over, but there is power. If the key will not turn past the on position, and it turns to all other positions then you ...

Question about 1996 Grand Cherokee

0 Answer

1996 Jeep Grand Cherokee 4wd v6. Car would not start. We change the crank shaft position sensor and the car started with no problem. 1 month later when we start the car the check engine light comes on

Question about 1996 Grand Cherokee

1 Answer

2008 Grand Cherokee auto-leveling headlamps not working, Stuck in the down position cannot drive at night on dark roads unless using high beam position. This high beam light position is still so low ...

Question about 1996 Grand Cherokee

3 Answers

where is the crank shaft position sensor on a 2002 Jeep crank shaft position sensor in the transmission bell housing, passenger side at about 11o'clock if looking from the front. take a look on the ...

Question about 1997 Grand Cherokee

1 Answer

where is the throttle positions sensor located The Throttle Position Sensor, or TPS is connected to the throttle shaft on the throttle body. Fig. 2: Disengage the Throttle Position Sensor (TPS) wiring

Question about 1999 Grand Cherokee

1 Answer

...jeep cherokee code what code is my jeep throwing it says p0340 , whats that? P0340 JEEP - Camshaft Position Sensor Circuit engine cylinder Bank 1 Sensor 1Possible causes- Camshaft Position ...

Question about 2000 Grand Cherokee

1 Answer

main belt possitioning positioning of fan belt I believe the belt should be positioned in such a manner that you as the driver and the passenger you might be carrying are not in any compromising ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...