Questions & Answers for: polycom default password phone

...polycom.com/voice/voip/sip_sw_releases_matrix.html then used FileZilla, configured the client and password as PlcmSplp and set the shared folder where i had the phone software. then i configured the ...

...polycom VSX 7000 system. now how can i reset the password? pls help ASAP. The default is Admin with password of the 14-digit serial number More than likely you'll have to flash the codec to factory ...

password is the same as the serial no! Can anybody help me , I have new polycom VSX 7000 .it did not taking default password like admin and serial number .If any other password .Please reply the same

...Hi, I have polycom vsx8000 VC unit & want to reset to factory default. Currently I am using 8.6.0 SCCP software version in Polycom, but not able to degrade or upgrade the firmware. PLS

...Polycom IP 550 to its factory default. Plug the phone in and allow it to boot up. Once the home screen is displayed, press and hold the 4, 6, 8, and * keys for about three seconds, or until you hear ...

default password for Polycom Soundpoint IP 320 SIP? Default Passwords: To get into the web interface, the default username/password is "Polycom"/"456" (Note that this does not work with Safari 1.2.2.)

What is the default password for the Nortel i2002 phone? When I plug the phone into my network, it goes thru it's config process and then ask for a password? Default Polycom password is 456

reset polycom ip 5000 phone phone will not boot, is there a way to reset to default from the phone itself? hoe to reset my phone i forget password

...default on the Polycom 501 and it won't allow me to use the MAC address as the password If your phone isn't on a constant reboot cycle and can boot up, then go into Admin Setting and do a ...

...Polycom HDX system to reset the system in one of these ways: • Restoring configuration-Restores the configuration, which resets most system settings to default values. • Factory restore-Completely ...