metal pin does not poke thru the pod when you place the pod in the holder it does not poke thru the cup; the metal pin is broken? Do you need the top or bottom one? either way we have them here; http:
I put the coffee grounds in the water place by accident. I tried to clean out the grounds and poked around with an ice pick. Now the water comes out the bottom of the machine. What can I do? sorry but
Water does not go through the cup The drip spout may be clogged. Easy fix, just poke through it with something like an ice pick or even a paper clip. Also, you may be using too much coffee grinds ...
Is there a way for me to order a new red rubber gasket that goes over the needle that pokes the hole in the K-cup? mine seems to have disappeared! You bet, go to www. Kriton. Com. This should help. ...
where is the Exit needle Hi,The exit needle is on the bottom of the K-cup holder...it pokes the bottom hole in the K-cup...heatman101
keurig machine is clogged coffee seems clogged won't come out into cup try using a paper clip or long pin to clean the 2 tiny holes in the upper prong that pokes thro the top of the coffee cartage. I ...
...it, and run fresh water through MANY times. You can use an unbent paper clip to clean the nozzle. poke around while gently
Wil not brew Water drips out will not brew cup coffee Try Using a paper clip or long pin to clean the 2 tiny holes in the upper prong that pokes thro the top of the coffee cartage. I had the same ...
Why doesn't it brew - just drips? Try Using a paper clip or long pin to clean the 2 tiny holes in the upper prong that pokes thro the top of the coffee cartage. I had the same problem and that fixed ...
Question about K350 2.0 Brewer
My Keurig doesn't poke a hole in the bottom of the cup when I try to use it Look and see if the needle is bent, if not, check to see if the rubber ring is around it at the bottom of the needle.
Usually answered in minutes!
1,392 Questions
801 Questions
725 Questions
453 Questions
366 Questions