Questions & Answers for: Ranger model 2950

2950 WORKS FOR ABOUT 3 MIN THEN STOPS TURN OFF FOR TEN MIN WORKS AGAIN Hello, Just offhand I'd say you have a bad solder joint on the main circuit board. Without more info, I can not tell you where to

...2950 i dont seem to be getting anything on ssb anymore I know the recieve adjustments are ( and make sure you adjust in this order )L9,L11,L12,L13,L14,L4,L3,L5,L6.Adjust them for highest recieve you ...

no channel readout in front of radio ranger 2950 radio is a ranger 2950 work,s very well but no cannel read out in front of the radio can you help. thank,s bob conn usa.... replace memory battery its ...

lack of receive on a ranger 2950 what i have is a 2950 that sat for about 3 yrs ..i hooked it up recently and have talked to a few (close stations) but nothing like it use to do ...i hooked up another

my rci 2950 recieve cuts in and out, but my rci 2950 recieve cuts in and out, but tr, is fine check the ground wires A tuning can in the receive section of the radio is shorted.

my ranger 2950 wont transmit or receive sounds like a relay problem but dont no for shour can you tell me what is wrong with that radio thank you. could be a number of different problems causing this.

2950 RCI WONT TURN ON ONLY A BACKGROUND LIGHT You either have a bad LCD display OR the connection for the LCD display is loose/off. Its impossible to tell what channel you are on with a 2950 without ...

...model your ranger 2950 is. the internet says only first generation ranger 2950s use the battery second genration & third generation do not use the battery. but the internet could be wrong. so ...

ranger rci 2950 will not transmit rci will not transmit have you tried it on all bands? still won't transmit?take it to a tech so they can fix it properly.

on the internal battery on a ranger 2950 is the top of the battery positive and bottom negitive? The battery is completely dead? The + side of the cell is smooth on the top (no seam), and the - side ...