...list so it should work... thanks, To solve this problem you'll need setup the printer up with LPR Protocol. Go to Devices and Printers. Right-click on the printer in question select Printer ...
Troy 8150 Printer I have difficulty getting the LPR command to work with Troy 8150 printerThis printer works fine in Windows as a network printer I use the DOS command as follows - LPR -S(INSERT IP ...
Question about RangeBooster G DPR-1260 (DPR1260) Print Server
lpr which just hung the print que. I could print when the printer was connected via USB. So I compared the printer properties and the Dlink advance tab did not have a check in Enable advance printing.
...the AutoCAD plots partial. What can we do to solve? Set to LPR or toe RAW printing? usually RAW works. if you the printer connected in any of the parallel port the LPR (DOS) line print shuld
lpr -p print_q test.txt Both got the same flushing buffer result printing PS file without any problem The printer can't handle the data it received and flush it out of its buffer. Goto Menu->Settings-
...LPR printing will become the basis for all network printing while Novell print queues are phased out. Therefore, all Macintosh, Windows, and Unix computers will be configured to print through LPR. ...
...printing through photoshop. Hi, Go in the printer section under Control panel. Right click Epson 10000 icon, than Properties. Go to Ports. Click the port it is using. Configure port. Protocol must be ...
Question about Wireless-G WPS54G Print Server
...via a linksys wpsm54G wireless print server. No luck so far. Any advice? the disc won't work with mac - but you can do LPR on it but if you do LPR it will only support printing not scanning and
Question about I-4208 Thermal Label Printer
...from linux to the datamax I-4208 printer? Assuming you want to print the file use the command "lpr" This is the only protocol used by this printer anyway. If you have root access to the printer ...
...Tessitura, only the lower 25% or so of the page will print. Printer port is setup to print LPR, queue name is lp. lpr byte count is enabled. If I try to print raw, nothing at all will print. ...
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions