Questions & Answers for: kettle cord plug

My detatchable kettle is not getting electricy from the cord to the kettle If you are in the UK it could be a blown fuse in the plug, if not a loose wire or contact in the base..

...I need the cord that plugs into the kettle that holds the popcorn. The CCP-510BLK will use the same parts as the red CCP-510. For replacement parts, try calling Nostalgia Electrics at

My Black Seattle Kettles wont heat up, but the light still works thermal fuse or element also cord or plug

...cord back into the kettle. Follow these simple steps and see the magic for yourself: Fill the kettle with an equal part solution of water and household vinegar and let this soak for an hour. Once the ...

...cord of the kettle. Allow the kettle to dry out in a warm place for a day. Also check it at another power outlet to eliminate any problem with the outlet you are using. Firsts change the fuse dry out ...

...Had it been it switched on without any water in it? If it is the old type where the electrical cord gets plug in at the kettle check if it is well plugged in otherwise it is time for a new

...cord itself breaks either at the plug or at the entry point at base of kettle, do a wiggle test on the wire to see if it makes a contact, just be careful of a shock hazard, do not do this if you see ...

...cord from a kettle for our LG plasma TV (we cant find the TV cord) it isnt working properly. The pixals breakup. I said we needed a audio/video specific cord.Is that right? Hi if the cord fits the ...

...kettle does not switch on Without knowing the model, I can only give you a general procedure to follow if you have a meter with volt / ohms reading. Unplug the cord and check it for continuity with ...

kettle model BC1710C. I need replacement cord for it please? Question edited for clarity and toss in some CAPS. It appears to be an unknown model. If it is a standard plug in kettle, you can get leads