Questions & Answers for: ide drive

...Drive 0) on the Primary IDE channel; The CDROM should be connected as Slave(Drive 1) on the Primary IDE channel. Connect the DVDROM as Master(Drive 0) on the Secondary IDE channel, and the ZIP Drive ...

Ad

Question about (M520HD80G) Hard Drive

1 Answer

...IDE drives 2 drive must be set to master and the other to slave Set the drives by using the jumper on the back the instructions are written on the drives Connect the Ide Cable and then the power and ...

Ad

...IDE DVD Drive for a while. And the Motherboard recognizes HDD as Primary IDE Master and DVD Rom as Primary IDE Slave. Yesterday, I install one more IDE hard drive and add SATA DVD RW Drive. I made ...

Question about ECS 945GCT-M/1333 Motherboard - v3.0, Intel 945GC, Socket 775, MicroATX, Audio, Video, PCI Express

2 Answers

...IDE DVD Drive for a while. And the Motherboard recognizes HDD as Primary IDE Master and DVD Rom as Primary IDE Slave. Yesterday, I install one more IDE hard drive and add SATA DVD RW Drive. I made ...

...all that's needed is the laptop to hard drive adapter. They come in various flavors.... ide to sata (with power converter), ide to usb, ide to ide (44 pin female to 40 pin male), take your pick.

Question about DX4720-03 PC Desktop

1 Answer

...IDE drive to a new SATA drive, try using a IDE slave cable. These connect an IDE drive to one of your USB ports and allows you to use the drive just like an external hard drive or USB thumb drive. ...

Question about DX4720-03 PC Desktop

1 Answer

...drive IDE cables are flat, ribbon cables, usually grey and about 3 inches wide. do not confuse this with the floppy drive cable, which will look identical, except that it is 2 inches wide. the cable ...

Question about P4P800-E Deluxe Motherboard

2 Answers

...IDE drive (only contains data) as second drive. System will not start up with IDE drive connected. Looked at BIOS and window which shows the drives shows the SATA as the 3rd IDE drive and all ...

ide drive diagnostics check and it says Primary IDE Drive 0: WDCWD800BB-75HAO - PASS Drive 1: No IDE device Secondary IDE Drive 0: HL-DT-ST RW/DVD GCC-4481B - Diagnostics not supported Drive 1: No IDE

Question about T3995 Power Supply Part Number Replacement

2 Answers

IDE 250GB drive. These drives are obsolete and hard to find. I suggest using the following Generic IDE to SATA device on Amazon for about 7 dollars and then replacing the IDE drive with the SATA drive

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Computers & Internet Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Computers & Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...