I need a users manual for a Humminbird 3 dimensional sonar, Model # D-3 120 I have resolved the problem thankyou.
manual i need a manual for humminbird fish finder wide 100 you can download the manual from the below link... http://www.humminbird.com/PDF/100sx.pdf a very helpful rating wud be appreciated for ...
Question about Smartcast Rf 35 Dual Display Wrist Sonar
problems with these units. The only Portable Units Humminbird makes that are of a quality design are the 500 Series Portables. Only problem is your gonna pay the price of a full unit. Hope this helps.
turns off humminbird fish finder 161 turns off The first thing you need to check is if you have sufficient power going to the fishfinder. Take a multimeter and measure the dc voltage going to the ...
Question about Fishing System, 787c2 Combo Without Gps 4066801 Plus
Our new 787C2 fish finder by Humminbird is not working correctly. It worked for our first view fishing trips, but now the display is not showing any color, structure or fish. It tells us the depth and
Question about 800c Series Color SonarGPS (858c dual beam) ()
...can i do? antonio aviles No problem Antonio! Here's the link for your Owners Manual! http://store.humminbird.com/media/document/M_5317431_B.pdf Hope this
I have a Humminbird 565 that is about 3 years old and the end of the transducer has opened up and the sealant has all leaked out. I also have and older one that is doing the same thing. What's up with
What size fuse to use when connecting a Humminbird 596c HD DI to the battery? Best regards John I put in a 3 amp fuse like recommended for these units and have had no problem. Either an auto fuse or ...
Question about 596 c Series Fish Finder ()
My Humminbird 535 will not exit out of Simulation Mode. How do I fix this problem? click menu twice scroll down to (unit) click on it scroll down to simulator mode see if its on if so click on it turn
Question about 525 Fishfinder
I have a Humminbird fishfinder 525. It goes directly in simulation mode and says: No svinger connected... What could be the problem? If the transducer is disconnected, it will automatically go into ...
Usually answered in minutes!
413 Questions
78 Questions