Questions & Answers for: Necchi how to hook it up

...up bobbin thread Hi ok everytime i try to draw up the bobbin thread it catches on the shuttel hook. I am a seamstress but i can't figure this one out. this was my moms so can you help? If the ...

...the case. I can't figure out how to fit it back in. That piece is a sweep that helps keep the hook clean. It is not necessary for the machine to use, I have thrown away many of them. If you can ...

...left and the silver ring should come out. Behind the silver ring is the bobbin case stuck in the hook. Remove that, jiggle it, move it, just work the bobbin case out of the hook. Now put the hook ...

...using same needle model. - check hight of needle bar is ok - check timming between needle bar and hook. - check if your material is very stritch or no - check blad point of hook is ok or no best ...

...up the bobbin thread. I have checked threading, bobbin, cleaned, and then lightly lubed the sewing hook. Then reviewing some timing diagrams I found on line it appears the machines timing has

needle keeps striking hook. is this a timing problem? Remove the bobbin case and unthread the machine. Ensure that a new needle is inserted all the way up into the needle clamp. Set the machine for ...

...is bound up neddle will not move Normally this will be caused by lint/thread caught in the bobbin/hook area.Remove the bobbin case, push the two fingers (about 4 and 8 oclock positions) that hold ...

why does the shuttle hook grab the spool thread instead of the bobbin thread? It wraps the thread around the bobbin and binds the machine up. The shuttle hook is suppose to hook the needle (spool) ...

...machine be checkedat a repair shop to see if the bobbin case needs to be replaced andto see if the hook and the hook race need to be ...

...called timing. While the needle is on it's way to the needle plate the thread is picked up by the hook(sharp, under bobbin). If the hook and needle aren't in the right position the thread won't be ...