Question about Amateur&Consumer Radio Replacement Batteries: 70B-75.....1400 mAh 7.2V NiCD
...FT 75 transceiver I would like a manual or any other details about the rig Here's a link to the manual. The site will also give you access to more information on this rig. ...
...tighten to 37 ft pounds all bolts step 2 turn all bolts 60 degrees step 3 loosen all bolts step 4 retighten to 30 ft pounds step 5 turn bolts 75 degrees and step 6 turn all bolt another 75 ...
need the torck specks for torcking the head to the block on a 2004 nissan altima 2.5 litter step 1- 72 ft bls step 2- loosen 0 ft bls step 3- 32 ft bls step 4- 75 o ( degrees ) step 5- 75 o ( degrees
...75 ft. lbs. (91-97 Nm), at which they should remain undisturbed. Six IN V - 6V Fig.: Cylinder head bolt torque sequence - 6 -cylinder engine Tighten the head, according to the illustrated sequence in ...
1-8: 35 ft.-lbs. (48 Nm). 3. Bolts 1-8: 55 ft.-lbs. (75 Nm). 4. Bolts 1-8: 55 ft.-lbs. (75 Nm). 5. Without using a torque wrench, turn bolts 1-8 - An additional 90°. 6. Bolts 9-11: 21 ft.-lbs. (28 Nm)
...specs Hi Anonymous, all harley fasteners are steel grade 5 or better. 1/4" 10 ftlbs. 5/16" 20 ft lbs. 3/8" 35 ft lbs. 7/16" 55 ft lbs. 1/2" 75 ft lbs. 9/16" 115 ft lbs. 5/8" 155 ft lbs. Good ...
harley torque specs 99 xl 1200s Rear drive sprocket bolts torque specs Cast Wheels 55 to 65 ft lbs 75 to 88 nm Laced Wheels45 - 55 ft lbs 61 - 75 Nm
...75-85 ft-lbs. Pressure plate bolts 35 ft-lbs. Front cover bolts 12-15 ft-lbs. 351W Torque Spec. Fastener Type Torque Spec Main cap bolts 95-105 ft-lbs Connecting rod bolts 40-45 ft-lbs. Cylinder head ...
...75-85 ft-lbs. Pressure plate bolts 35 ft-lbs. Front cover bolts 12-15 ft-lbs. 351W Torque Spec. Fastener Type Torque Spec Main cap bolts 95-105 ft-lbs Connecting rod bolts 40-45 ft-lbs. Cylinder head ...
Question about 2000 XL 1200 S Sportster Sport
...the main crank bearing torque it says 18 ft lb at first pass second pass 75° angle I don't understand what 75-degree angle means 75 degrees clockwise from the 18 ft/lb. Just more than 1/3rd turn ...
Usually answered in minutes!
980 Questions
644 Questions
497 Questions
317 Questions
274 Questions