Questions & Answers for: fit transducer

...transducer plug fit the x48? The answer is yes. The transducer will fit both units fine without any modification. See ...

...Be sure that the hoses at both of the EGR valve and EGR valve control are connected to the proper fittings. Be sure the electrical connector is firmly attached at the valve control. To check the

...Fit It Using Epoxy Glue Ensuring No Air Pocket Between transducer And Hull. If transom Mounted Replace Transducer. Hope this Helps Gordy Transducer can be broken and hanging loose on wire or could ...

...back of the gearbox, it is a transducer that sends impulses to the speedo electronicially usaully fits into the older speedo drive ...

...fit. Can the transducer be mounted inside the hull? It currently gives me strange readings whether inside or out but we are on dry land - if that makes a difference there are two kinds or transducers ...

..no depth reading. Old transducer cable was crushed by outboard and have fitted a new transducer..still not working..is there an internel fuse that could have blown?? Hi, Check for debree on depth ...

fit? You should be able to use most any normal water transducer that that will work on that unit. The key issue is that it needs to be 'fluid coupled' to the ice. Just create a small puddle on the ice

...opinion, it is better to let a professional boat engineer install it, mainly for the correct fitting of the transducer on the stern. Correct placing makes all the difference to a good set up, ...

...fit the transducer that came with my unit. The transducer shown in the "how to" video is not the same as what came with my Hook 3x. It's slimmer and is shown as a $70.00 add on. no it will not . the ...

...transducer cable doesn't match the head Can it be modified to fit? Common changes involve a new connector that fits the unit and splicing in the old cable. If the old cable is 10+ years old, I would ...