Questions & Answers for: Jeep Grand Cherokee eraser battery

inspection rejection due to inop K,A,M inop kam (keep alive memory inop) recently rejected for sticker due to kam not operating. battery was not diconnected nor were any codes erased or eec test taken

I put coke (soda pop) on my battery posts to clean them and now when it starts I have to hold my foot on the gas. 97 Jeep Grand Cherokee limited. It sounds like you have a brand new problem besides ...

My Grand Cherokee Laredo had an accident & Battery was Discharg My Grand Cherokee Laredo had an accident and was parked for 6 Months, awaiting Spare Parts from North Carolina. The Battery got ...

1997 Jeep...cooling sensor bad keeps coming on but not over heating. This is a common provblem with this sensor; first unplugged the sensor and clean the harnesses pins. Erase the ECU stored codes ...

I have a 2.7diesel grand cherokee 2002 i have to disconect the live battery lead and reconect it every morning and it then starts ok for the rest of the day. Dear, The problem is from trouble code ...

Changed o2 sensor and to reset how do I do it Disconnect the positive battery cable for 15 minutes and the computer will erase any codes in memory.

how to turn off CHECK ENGINE light wth my self Thanks for choosing FixYa. You need the computer scanner to erase the code. If you don't have one, take it to Autozone and they can erase it for free

check engine lights code 31 how to erase Disconnected the battery cables few minutes to reset your computer; if your check engine link come on again, and your code 31 - Fault EGR... first need to ...

How can p0123 sensor be reset? You can clear the code by disconnecting the battery, (both cables) for approx 10 minutes. But if you have a problem, that code will come back in under 35 miles of ...

this Greg thanks . how do I clear the code? Clearing CodesPrint Stored faults should only be cleared by use of the DRB-II or similar scan tool. Disconnecting the battery will clear codes but is not ...