Questions & Answers for: enable usb ports

...to enable the USB ports in your BIOS. Hit delete repeatedly while it boots up and enter the BIOS settings. Try to find something that indicates whether the USB ports on your motherboard are

USB ports may have become dissabled by accident got to your system bios and see if your USB ports are enabled If your USB ports are enabled check to see that they have an IRQ assigned to them. if your

...enable them. If youre running Windows 98 Second Edition or newer, the USB port drivers are typically built in. If all else fails, you can purchase and install a USB card. If its an older machine, get ...

...cross? If yes, right click and enable those USB Ports. If it is enabled try with other usb ports . If it is not detected go to control panel ->add hardware to detect the player . Hope this helps

...to configure any usb ports if the usb ports are enabled in BIOS all the usb ports will be activated automatically(front and rear). If still you want to check, go to BIOS and check if they are

...this divice working properly please help me There's only one USB port on the c600 check the usb is already enable from the system setup if disabale enable it other wise scan ur comuter from the ...

...USB is Enabled/Disabled in BIOS.Enable it if it is Disabled. Step2:Check Whether USB is Enabled in Device Manager.Enable it if it is Disabled. Step3:If Still you are facing it should be problem with ...

...usb ports I have a Gateway M360 notebook. I have power on the usb ports, but I can not see any devices that I plug in to any of the usb ports. Hello, You can check if your USB controller is enabled. ...

...#174; 98 or Windows® ME driver 5.1 Turn on the power of computer and make sure the USB port is enabled and can working properly. 5.2 Insert the driver of USB-SERIAL ADAPTER into CD-ROM drive. ...

...enable it if it is disabled Firstly, you need to check whether USB port work properly in Device Manager. If you see a yellow exclamation mark, maybe therea are no drivers for USB port. You need to ...