Questions & Answers for: dewalt torx

Dewalt cordless DW995 , 18.0V broken piece in side.Can't open. The screws are unique to me and I'm wondering where to get a screw bit like that and what is it called? A TORX I believe , if it is a 6 ...

What tool? What tool do i use to get the screws out of the charger? DW9107 usually it is a number 1 or 2 phillips or they used a #10 Torx drive bit for the screws. if it is star in shape it is the ...

...dewalt 12 volt drill Hi there, Remove the battery and sometimes the screws on the drill casing are a torx instead of phillips so you will need a set of torx screwdrivers. Once you have removed the ...

...dewalt dc980 drill the centre screw is stipped and tight and i need to remove the chuck to replace the transmission,i realize that the screw is a left handed thread,need help. Drill a hole in the top ...

...Dewalt Cordless Drill model # dw959. If it is a torx, what size is it ? Is it a right or left handed thread ? don't know the sizes for the screw but it is the wrong way threads. when you get that out ...

Dewalt 3/8"VSR 6AMP CORDED dw106 DRILL CHUCK ---drill chuck will not close My solution when the other mentioned ideas didn't work was this: I removed the 7 Torx #20 screws ( a common screw driver

dewalt drill to change brushes usually there is a cover on the back with torx drive screws that need to be removed. Some of the motors do not have changeable brushes though. I would recommend going to

...Remove the 2 torx screws that hold the foot on the front of the tool - the boot will slide right off with the blade release lever. DeWalt makes a shaft upgrade kit that is fairly easy to

...dewalt 236 1/2 13 mm vsr drill Dont know how to get it off pls help There is a torx headed screw inside the chuck that is reverse thread (Right hand to loosen) - remove that then the chuck will spin ...

...DeWALT DWD520 Hammer Drill Looking inside the chuck, the chuck screw has no Phillips or Hex head. The indent appears to be totally round. So, how do you remove it so the chuck can be removed...? Open ...