Questions & Answers for: com port

...com port numbers?? hi guys. have program cmap, living aboard boat. Purchased gps reciever and can get it running in com port 9 and 10,, tried to configure cmap to run with the gps but it wont ...

...your computer. Windows should find your hardware and install the COM ports. If not, add the COM ports manually. Leave the printer COM port settings on COM port 1 or COM port 2, whichever you

...com port driver for the scanner. According to the document, a found new software wizard should be appeared after i scan a barcode with the value 316470, but it didn't appear. I did try to update the ...

com port 3 modem connects to com port 3. Not listed in device manager. Only lists com port 1 and printer port. Fresh format of hard drive didn't help. Windows 2000 SP4. help You may have to enable the

...com port trying to flash plugged in Null modem serial cable flashed numerous boxes before but on this ex1000sl no com port i have been in device manager and all ports are ok ? go to devic then change ...

...com port can,t see the reader Devices that use COM ports can be frustrating because there are three things to configure. 1) Make sure the com port you are trying to use is enabled in the BIOS Enter ...

COM port and the PC's USB serial interface doesn't automatically default to a COM port. Make sure you have installed the software that was delivered with your USB-to-Serial adapter and look on

...COM Port Number with elm327? Want to know how to change the COM PORT NUMBER? From DeviceManager, select "View devices by type", then "Ports (COM & LPT)". Select the USB serial port and click ...

port: COM 23 Modem name: MMX310G 3G USB Manager At port: COM 23 Firmware version: LQAEB42.1.0_MG68 IMEI: 910602800709695 IMSI: 405801144256457 unlock nck code needed Modem name: MMX310G 3G USB Manager

...com Most likely the send mail port is blocked in your firewall. If your settings allow you to set a port number. The default is port 25, but the gmail smtp server does not use that port, try setting ...