Question about DiALTA Di200 Copier
...key to enter the new data. 5. Power the machine OFF then ON to exit the 25 mode. Note: If the F code reoccurs after powering the machine ON or following warm-up, contact service immediately. good ...
Question about Bizhub C300 All-In-One Printer
code, please do the following 1. Turn OFF the Main Power Switch. 2. Turn Main Power Switch ON while pressing the Utility/Counter key. 3. Touch Trouble Reset. 4. Check to make sure that OK is displayed
Question about Bizhub 600 750 Image Control Board 57aa-9016g
...code c-3803 c-3830 Sir/Mam, POWER off the machine Main power switch is inside the machine. Keep the sub power switch on one located on the side of the control panel. Now hold down Utility/Counter ...
Question about Bizhub 600 750 Image Control Board 57aa-9016g
...code Since I cannot photocopy or scan? if this procedure does not clear and it come back mite need new exposure lamp or CCD exposure lamp is bright lamp under the glass the CCD is the large black ...
...code reset will appear , let goo of reset button. Press error code reset and then turn main power switch of for 20 seconds. turn main power switch. If code returns contact me on my phone to ...
Question about Bizhub 600 750 Image Control Board 57aa-9016g
...power on. If the code comes back have a technician look at the machine do NOT RESET again you are resetting the codes for the Fusing unit the Hot part could CATCH on FIRE!!!!!!!! or do more damage to ...
code sc36-03 ? Power off the machine. Now hold down the 2 and the 5 and power on. Mode 25 screen appears. touch the Soft switch tab in the first box on your left you will put a 3 in the middle box you
...power on. if no code ok, if code re-appears do NOT Reset, machine is telling you it is broke if you reset again it can catch on fire the code you are messing with the is the fuser the hot part, it ...
...off. Power on if the code comes back your fusing unit (The Hot Part has issues) Do not reset again your resetting the fuser code. The fuser could catch on fire, that would ruin a perfectly good
Question about Bizhub C452 Copier
...power off a for 10 minutes and the same code still comes up on startup. What is the fix for this? Hopefully there is something that can be done aside from replacing the printer control board. get it ...
Usually answered in minutes!
1,023 Questions
924 Questions
417 Questions
321 Questions
302 Questions