Questions & Answers for: check hdd board

Question about P4V8X-X Motherboard

1 Answer

Hdd

...support sata 1 not 2 and your hdd may be a sata 2 one..so all you have to do is to check the hdd jumper and set it on sata 1 and also check the bios for the right settings to be made... good luck ...

Ad

Question about PlayStation 2 (PS2) Console

1 Answer

hdd on another ps2 it is good. and network adaptor also good. i am a mobile phone enngineer and i can modifia board. please suggest me what i need to do? Transfer the drive and defeagmenting drive and

Ad

Question about 6513 Copier

1 Answer

...HDD. CHECK THESE; poor connection between the HDD and the HDD controller, the AC power connector to the HDD is disconnected, HDD defective, HDD controller board defective, BICU defective. Make sure ...

Question about e-STUDIO 4511 Printer

1 Answer

Check if the HDD is mounted. (2) Check if the specified HDD is mounted. (3) Check if the connector pins of the HDD are bent. (4) Check if the connectors CN116, CN132 on the SYS board is disconnected.

Question about e-STUDIO 4511 Printer

3 Answers

...Check join HDD with controller to Change HDD 823 Errors of the test NIB (board of the network interface) Switch off and include device to Check join NIB with controller to Change NIB 824 Errors NVRAM ...

...HDD. IT BEGANS TO RE STARTS IN EVERY 2 MIN. WHY PLZ HELP ME TO REPAIR MY BOARD THANKS...AND MORE THE WINDOWS IS AGAIN CLEANED BY THIS BOARD AS USUAL.. There is a problem with your computer power ...

Question about E-Studio 3511 Color Copier

1 Answer

...are open circuited. (3) Perform the bad sector check (08-694). If the check result is OK, recover the data in the HDD. If the check result is failed, replace the HDD. (4) Replace the SYS

Question about E-Studio 3511 Color Copier

1 Answer

hdd cannot recognised by computer.just keeo on reading.light on external hdd keep on blinking Sir. 1.check Hdd powe pin 2.check jumber setting 3.check SATA\IDE cable or 4.Board damage 5.Hdd damage

Question about E-studio 281c Copier

1 Answer

...bad sector check (08-694). If the check result is OK, recover t he data in the HDD. If the check result is failed, replace the HDD. (4) Replace the SYS board. U need to update firmware if replace ...

Question about E-studio 452 Digital Copier Printer Scanner

1 Answer

...of harnesses are broken. (3) Perform the bad sector check (08-694). If the check result is OK, recover the data in the HDD. If the check result is failed, replace the HDD. (4) Replace the SYS

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Computers & Internet Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Computers & Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...