Questions & Answers for: Bissell change handle Vacuums

bissell 7920 proheat I have changed the belt and now the brush only spins with handle in upright position. sounds like you didn't get the ends of the brush roll in the slot, where the red piece goes, ...

...Now i have 2 perfectly good Bissells. Try changing the belts. I ran into the same problem. I changes the belts and it is working

...to the motor. Hope this helps someone else! Same problem here; brush motor started/stopped as I changed the angle of the handle. Before finding this solution, I had tried bypassing the cut-off ...

...change it? my wife had the same problem. after checking the belt (not very user friendly) and all the wires on the motor for loose connections i was about ready to chuck it when i noticed the handle ...

...my vacuum has too much vibration in the handle. There is something wrong but im not sure what. I've changed the belt and cleaned the beater rod....please Help! I need to use it by Friday. (Im clean ...

i was changing the pump belt now i have this lever like thing w a spring on it that i cant figure out where it goes or how it came off could it be the handle lock lever

Bruch will not spin Cannot get the brush to spin changed the belt clean everthing and still not working Make sure the brush switch on the canister is in the on position. The handle must be reclinded ...

use a broom handle to push clog back through. If the hose isn't blocked, check the tank where the hose attaches. Just inside clogs often form. Clean if necessary. Check the filter, and change if dirty

...change the knob to desired setting, and recline the handle for adjustment to occur. If you are still having difficulty, you may want to have your vacuum inspected by a Qualified Technician at one of ...

changing trigger in the bissell Hi Scott. You may want to purchase a new handle for your BISSELL machine. Here's a link to the BISSELL website. http://www.bissell.com/parts/?cid=ccsocial