Questions & Answers for: ac motor wiring

Question about JVM1640 Microwave Oven

1 Answer

...AC motor, the wiring will not matter. Look at the numbers on the motor. You will see a voltage rating, RPM rating and if you see the text "50/60 Hz" it is an AC motor and the wiring will not matter. ...

Ad

Question about JVM1640 Microwave Oven

1 Answer

...AC UNITS RELAY Check your furnace for power. will be 4 wires. power ground and 2 thermostat wires. Check for power at the time delay relay, if you have power there check for power going in the fan ...

Ad

...ac unit. I am replacing the motor with a new one but the new one has 4 wires and the old one has 3 wires. The new motor has 2 wires going directly to the capacitor where the old one had one wire to ...

Question about Universal Ac/Dc Open Motor 1 Hp 10,000 Rpm 115V Rotation 2M191

1 Answer

...motor with a AC Variable speed control foot pedal.My question is what speed control pedal should I use and how should I wire the system up?please help,thanks. Best Regards Frank call grainger's ...

Question about Electric K1297 AC/DC 225/125 Stick Welder

1 Answer

...the wires back. Billy Lynch Fan Motor MOTOR 2910.0 230.0 AC Here is a Picture of the wiring Diagram that should be on the inside of the rear cover If this is hard to read Here is a link to the ...

Question about 1993 Explorer Limited

1 Answer

...Motor & AC Switch No fan operation on ANY switch setting, and also, the AC button does not engage the AC or turn the AC indicator light on. Replaced blower resistor, and blower motor itself. No ...

Question about 1993 Explorer Limited

1 Answer

...AC fan motor, replaced fuse, immediately blown. Should I order new AC motor or are there other areas I should check? I would trace the fault first. Could be a shorted chafed wire. Could be the motor, ...

motor from ac to dc . And what do I use for speed control? You can't. You buy AC motors to work from a mains supply, or DC motors to work off a battery. You can't alter the wiring to change one to the

...position. 2.incline motor AC wire not on right position 2.incline motor AC wire insert again to be sure right. 3.incline motor connect wire is broken. 3.change connect wire or change the incline ...

Question about 1993 Explorer Limited

1 Answer

...AC Motor serial 2G98 Wiring diagram The wiring diagram for an A.O. Smith AC motor may vary depending on the specific model and application. However, here are some general steps to reverse the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Microwave Ovens Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Microwave Ovens Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...