Questions & Answers for: 20 lbs gal

motor comes on, but air pressure does not go up.....will never get above 20 lbs of pressure you have to adjust the regulator usually turning clockwise increase the pressure.

what size gas tank is in my 1994 blazer 20 Gal. 576-329 Weight:23.87 lbs Warranty:1 YR Dimension:33inch x 22inch x 10-1/2inch U.S. Gallons:20 Liters:76 Lock Ring / O Ring:LO01

20 lbs- and wont go any higher and motor runs the pressure builds to 20 lbs and wont go any higher. THe motor continues to run after this and wont stop. sounds like the regulator is fualty. Major leak

...20 LBS. RUNS FINE, BUT WILL BOT BUILD UP PRESSURE PAST 20 LBS. WILL JUST CONTINUE TO RUN AND RUN. THE FILTER IS MISSING, WOULD THAT HAVE ANY IMPACT? Check to see if air is leaking past 'pressure ...

...20 lbs. what do you think? I removed out let air line to pressure switch and ran compressor with same results, no more than 20 lbs of air build up. Air filter is like new, no restriction. Is the ...

Wont go above 20 lbs Hi, my name is John. Welcome to FixYa. Check all your lines for leaks. .....John

...20 lbs pressure no matter how long it runs. Remove the compressor head and examine the valves for any damage. Make sure there are no tank leaks causing the air to flow away. Make sure the intake ...

...20 lbs. when I turn it off I don't hear air leaking out anywhere and when it's running it runs at a higher pitch ( similar to a shop vac when it gets clogged) I was using it to spray wall texture so ...

20 lbs and goes no higher. I have removed the shroud and can feel a large amount of air escaping around the bottom of the piston. Suggestions? Thanks Rich Sounds like part #27 is worn. Replace # 24 24

My 'cut in' and 'cut out' is 20 & 40. The tank is 36 gal & 100 lbs max working pressure. Can I increase cut in & out pressure? Yes, but don't forget about the safety valve release pressure.