I have a sony color rear video projection tv, Model# KP-61565 Serial # 9012605. Made Nov. 1998 While watching it, the TV made a pop noise and the sound and picture went out. When trying to turn in back on there is a red blinking light, no picture or sound. It flashes for about 30 seconds.

Sounds like the Blue CRT has an issue which is very common problem for that model. I wouls try replacing the Blue CRT assembly.

Pliz try ebay.

Oh, yea - another misaligned projection TV. All rear projection TV's seem to eventually get this disease.
Fix: perform a "convergence," which will converge all 3 color projectors to the same point.
How-to video: www.youtube.com/watch?v=esk4nYZKFcg
how-to instructions: www.ehow.com/how_2034880_perform-convergence--tv.html

When turned on the visual is blurry. the image color is only red. And when i adjust the color it doesn't work.

You can find a new OEM Sony replacement CRT's (red, green, and blue bulbs) for a model # KP51HW40 from a major Sony distributor at the following links:

Sony KP-51HW40 Replacement Part Blue CRT Bulb

Sony KP-51HW40 Replacement Part Blue CRT Bulb (for serial #'s 90000001~90999999)

Sony KP-51HW40 Replacement Part Green CRT Bulb

Sony KP-51HW40 Replacement Part Green CRT Bulb (for serial #'s 90000001~90999999)

Sony KP-51HW40 Replacement Part Red CRT Bulb

Sony KP-51HW40 Replacement Part Red CRT Bulb (for serial #'s 90000001~90999999)

sounds like your convergence IC's have finally gone bad.. they seem to last 5 years on average.. have a look here: http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

Hi,
Try HERE to get replacement screen for your TV.
Good Luck.

Its your receiver, not your tv! Switch receivers and it will go away!

Take a look at my post on Convergence IC replacement..Thank you GURU JAY

Does the timer/stand-by light blink at all? If so, count how many times it does. It will usually be in intervals. If it isn't blinking, and you have nothing on the screen, you might have a problem with the "G" Board, part # A1316499A.


C-Dog