At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: FEATURE BUTTON IS STUCK ON, MUST PUSH ANSWER BUTTON...
With this nec phone. you need to unplug it all . stick a small screwdriver on the feature button to pop it up and off the board (since its stuck) and plug it back in. to reset the phone.,
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
To get out of the camera push this button on the front of the phone near the bottom.
See the small version of that big circle with a square in it at the bottom of the phone? Any time you are in something and you want to get back to the "home" screen where you see all your apps, touch that home button
.
To make and receive calls all you care about is the button with the phone receiver on it.
To make a call...
How to answer phone calls... If the phone is locked, just pull the little green and white phone button to the right to answer, or push the power button to ignore it.
If the phone is already open, tap the green phone button. To hang up or ignore touch the red button.
The little silver button on the side of the headset is how you answer calls when using the headset, when you get a call just press the button, this is also how you hang up
If someone calls in while you are on the phone, you should just be able to click "answer." To switch back, push the trackball in and click on "flash" in the menu that appears.
This is a feature for in-house conference calls. The problem lies with two people answering the phone very close together. In the handbook, it states that if you want another party in your office or home to join in on a conversation, push the Line button twice. This allows another individual in on the phone call. This also happens in our office. One party answers the phone, while someone else is trying to answer the phone. One of the two individuals inadvertently is the first one to answer and pushes the button 2x. This automatically lets the other individual in on the line. The solution is to make sure if you answer the phone, don't push the button 2x and assume someone has already answered it.
Establish a conference call between yourself and two other parties.
1.Make or answer the first call. 2.Put the first call on hold. 3.Make or answer the second call. 4.After the second call is connected, press [Feature] [3]. 5.Press the line or intercom button of the first held call. 6.Press [Rls] to end the conference call
To remove yourself from a conference permanently (unsupervised conference):
Press [Feature] [7] [0]. The other two callers remain connected. (Some external lines may not support this feature.)
×