HP Photosmart D5160 gives error message -0 03 31 IF F$ 4d dd d6

Printer Spool offline:

Disconnect the USB cable, go to RUN and type in services.msc and then find print spool and right click, then choose restart.

or:

Start-->printers and faxes-->right click on the printer-->properties-->make sure it

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

When the attention light comes or blinks you should also get an error message:

Did you get the error message Original HP ink depleted displayed on the product. If so go to the following website for illustrated instructions on hot to resolve:

http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01370588&cc=us&lc=en&dlc=en&product=3194498&tmp_track_link=ot_search

If got a different error message you may be able to find assistance by searching the above site.

Trust this is helpful.

u must uninstall software unplug your HP!
Shutdown your PC!
Reinstall drivers!
Connect your HP D5160 printer

You can download the Softwares/Drivers for your printer from these links (similar with the contents on the Hp CD) :
Hp Photosmart D5160 Printer for windows xp 32 bit
or
ftp://ftp.hp.com/pub/softlib/software10/COL15834/dj-41864-2/TF_regna_psp_NB.exe

Hp Photosmart D5160 Printer for windows xp 64 bit
or
ftp://ftp.hp.com/pub/softlib/software10/COL15834/dj-41864-2/TF_regna_psp_NB.exe

Hp Photosmart D5160 Printer for windows vista 32 bit
or
ftp://ftp.hp.com/pub/softlib/software10/COL18384/dj-47558-2/SF_CDA_Full_Non-Network_enu_NB.exe

Hp Photosmart D5160 Printer for windows vista 64
or
ftp://ftp.hp.com/pub/softlib/software10/COL18384/dj-47558-2/SF_CDA_Full_Non-Network_enu_NB.exe

Hp Photosmart D5160 Printer for Windows 7 32 bit
or
ftp://ftp.hp.com/pub/softlib/software11/COL30907/dj-76773-1/SF_CDA_NonNet_Full_Win_WW_130_140.exe

Hp Photosmart D5160 Printer for Windows 7 64 bit
or
ftp://ftp.hp.com/pub/softlib/software11/COL30907/dj-76773-1/SF_CDA_NonNet_Full_Win_WW_130_140.exe

Hp Photosmart D5160 Printer for Linux

For Mac Drivers, please visit here and follow the instructions given there.

It would be much easier for you and for me if you had mentioned the Operating System installed on your computer where you are going to install the printer. Anyway, select the suitable link for your operating system.

If you need further help, let me know.

Good luck.

Thanks for using FixYa.

Hello sir; Check very carefully on the door hinge there have a door switch actuactor, make sure it's ok not broken or the senser is on right possition.

I have the exact same printer. Struggled for hours with it, until I learned it's ways. If you have good cartridges in and purge your print buffer from your computer, then 'gently but firmly' slam the top cover.
I don't see sensors, etc that detect it being up, but I just closed mine, had ! blinking, etc. Then gently 'slammed' the top cover and it reset and worked great.

Follow the instructions on page below to install drivers and download manuals for your printer:


HP Photosmart D5160 Printer

just arrange the setting in the property menu...

There are a lot of things to check for this issue on HP's site. Take a look & go through the list.
http://h10061.www1.hp.com/ccsearch/search?pname=HP+Photosmart+C6180+All-in-One&opname=HP+Photosmart+C6180+All-in-One&qry=Error+Message+0xc19ac3ff&method=prodFinder&ctry=us&lang=en&dlc=en&sni=1153494&search=0&submit.x=6&submit.y=6

You can chat with a HP tech here.
http://ipgweb.cce.hp.com/ipgna/caller/chat.asp?dd=aio&productName=HP+Photosmart+C6180+All-in-One&productCategory=421635&SCOID=238445&PSOID=1153695&aoid=null&lang=en&cc=us

Hope you find this helpful!
Good luck!
Keep me posted....

Mike

reinstall the drivers