We have a Lanier Copier Model 5635 and we need to know if saves PII information on a hard drive before we can remove it from our office.

Question moved to Lanier Copier

https://www.fortwayneprinterrepair.com/wordpress/2016/10/09/5222-sc320-error-code/

https://www.google.com/search?q=Lanier+5222

FT 5832 is analog copier their is no hard drive for analog it just present digital copier.

sc320 on the Lanier 5635 is a laser unit error code. Often if you power cycle the machine (turn it off with the orange power switch on the left side of the copier, wait a few seconds, then turn it back on) the code will clear and the copier will resume normal operation. If the error code comes back or doesn't clear, you'll probably need to replace either the entire laser assembly or the polygon mirror motor inside the laser unit. These are best done by a professional -- contact your local Lanier service company if the problem persists.

SC495 is generally a problem with the toner recycling system in a Lanier copier. Without knowing the specific model, I can't give you any more information. What model copier do you have?

You should contact a Lanier or Ricoh service technician to remove the hard drives for you, but if you have to do it yourself the hard drives can be removed by unscrewing and sliding out the controller board (on the right side of the copier). The hard drives are connected to the controller board by three screws and four connectors.

546 A Unstable fusing temperature The fusing temperature varies 50°C or more within 1 second twice continuously. • Thermistor defective(temp. senzors in the fixing unit) • Poor connection of the fusing unit • Power supply unit defective

Goto my website and Download the file from the Public Folder. It is the only Point 2 Point in the folder.

Do not forget to vote Yes or No if this information was helpful


www.copytech21.spaces.live.com

Laser diode beam not positioned correctly. Turn the machine off and back on and see if it goes away. You can run sp 2109-3 or 2109-4 in the service mode to adjust the beam in service mode by pressing on the yellow button. pressing the 107 keys and holding down on the clear button.

If this doesn't resolve the issue, you probably need a laser which we have one for sale here.

2 ways to check the meter.

press the user tools button on the op panel. on the screen press counter. you can either view the counter on the screen, or press print counter, and it will give you a hard copy.

the 2nd way is to look behind the front cover, probably behind a piece of tape, on the right side, about half way down.

good day, it wont print, coz you must pul the waste toner out. and replace a new waste box.