I installed this last night and it was working fine. Tested it several times, showed the family, etc...Everything worked great. My son left for 10 minutes and came home and it no longer worked. The keypad beeps when you push it but the deadbolt does not lock or unlock. (Can't even hear the motor turning to move it)

The short answer is yes, Family Tree Maker 2010 is fully compatible with Windows 7.
The Family Tree Maker team has been working with Windows 7 for several months-even prior to the release of Family Tree Maker 2010. Since the "Release to Manufacture" (RTM) version of Windows 7 was released last August, we have done additional testing in our labs as well as with alpha and beta customers with no indication of incompatibility. Family Tree Maker 2008 and 2009 are also compatible with Windows 7.
As a point of interest, it may be helpful for people to know that we continually test Family Tree Maker with 32-bit and 64-bit versions of Windows XP, Windows Vista, and Windows 7.
If you find a problem while running Family Tree Maker on your operating system, the best course of action is to contact customer support which can usually help you identify and solve the problem.

Why is my Powerbolt beeping?
http://www.kwikset.com/Customer-Support/Product-FAQs/Faq/50160000000HhhEAAS.aspx

Follow this link to find out how to remove the cover for your Powerbolt:

http://www.kwikset.com/Customer-Support/Product-FAQs/Faq/50160000000HhhEAAS.aspx

This link:

http://s7d5.scene7.com/is/content/BDHHI/40486-02

is the "manual" for the installation of the lock. Programming instructions are found on Page 6.

I'd recommend changing the 4 alkaline AA batteries at the same time.

Good luck--and please provide feedback if this helps!

Last fishing trip was at night and due to the brilliance of the display my son turnred it down and unknown to me actually turned it off ( the backlight) and it was only after trying everything else found it was the simple solution of turning it (the backlight) back on. oops

try takeing the ram cards and clock battery out and unplug the tower from the wall wait 1-5 min then plug everything back in this has worked for me several times on several different computers not sure it will help you but its worth a try

Well maybe a power surge happened last night.

Is the computer plugged into a power protector? If not maybe something got fried.

Check for the smell of burnt components. It smells like burning plastic kind of. If everything looks fine make sure everything is plugged in tightly like the power cord and hard drives etc.

Hope this helped.

Being that they changed when the daylight savings time happens everything doesn't adjust the new time accordingly. Go to your menu and scroll to the setup menu. Scroll down to world time and click ok. If you scroll down to date and click ok you can change the time there. Press up or down to change the date and/or time and right and lift to move to the next box. Hope this helps.

No idea, if its not spinning u definitely need to buy a new Laser Assembly. Sry!

press mute button on tv remote

I hope youre lucky enough for that to be the only time, but mine has been doing this for over a year, getting progressively worse. As of the last 2 days, it has to sit over night b4 it will show an image again. Good luck with this B.S. tv. (Just spent $250 on new bulb last month too, had set 2 yrs. )

Try to unplug the unit from the wall and let it sit for a few minutes then plug back in. May reset the door alarm lock out. Also, moisture in the air can be drawn in and freeze up the whole thing. That means turning it off with doors open for about 36 hours... Moisture is a killer in a freezer, freezes and blocks up every air circulation vent, etc.