Pull control panel, remove control board cover and check the white colored fuse, rectangular, that's mounted to the control board housing.
Rich
Western Appliance Repair
Appliance Repair Eagle
Here the part you will need to order and replace, its located behid the control panel( which you can acess by emoving the scrws from around the door assy, first be sure to shut off the power supply forthe wires will be live .. not a bad repair shouldnt take longer then 25 mins
http://www.appliancepartspros.com/part_details.aspx?part_id=3178588
SOURCE: RUN TIME ON NORMAL WASH IS ABOUT 3 HOURS
common failures on that usually are the heating element. Look at the botton and see if it is broken anywhere.
SOURCE: lock light stays on
First of all, we checked here and no one had an answer. So, we called the sears repair service and got to talk with a tech. They had the usual, already been tried answers but, out of frustration finally said to "pull the plug" and wait a minute. Worked!!! Hope it helps someone else.
If you cannot pull the plug, switch off the breaker at the electrical box and reset.
SOURCE: The
usually means u need service if u got your manual see if it mentions it, try to flip the breaker or power to it maybe it willl resets..... if u can find the tech sheet or wiring diagram on the unit maybe below behind kick panels somwhwere it might mention it,,,,,, i beleive sometimes that means ur heating element as gone out on some models,,, also some had 5 year part warrranties on the heating element... do not remove once u do u must replace that element.....hope this helps
SOURCE: I have a whirlpool gold
Hi,
Press the heated dry button for four seconds and it will unlock...
or Click here for more info...
heatman101
1,827 views
Usually answered in minutes!
×