I need a driver i think for my mag lt456s monitor i hook it up to computer and i get no power or anything

It needs AC adapter; http://www.12vadapters.com/adapter/power-supply/12v/for-lcd-screens/planar-pv150-15in.html

Please leave rating if it helps.
Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors: http://s807.photobucket.com/albums/yy352/budm
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Hi Jeff,

Not sure what you are trying to connect, This monitor is over 8 years old. It will only have a VGA connection and the power connector. If you are looking for a DVI connector, it does not have one.

The connections it does have would be on the bottom edge of the monitor.

Thanks for using Fixya.

You need laptop-type 12V, 2.5A (minimum) adapter plugged into back of VGA plug

need laptop-type 12V, 2.5A (minimum) adapter plugged into back of VGA plug

You can find one here: http://cgi.ebay.com/AC-Power-Cord-MAG-innovision-lt456s-14%22-LCD-Monitor_W0QQitemZ400013601369QQcmdZViewItemQQimsxZ20081130?IMSfp=TL0811301110003r8392
Hope this helps.

You can buy a power cord at any Lowes, Home Depot, Radio Shack or Best Buy. The power cord is not unique to the monitor.

no never use those one
it will belt ur curcuit in ur moniter
my friend lost his monitor juct cos of it


buy a new proper one

Perhaps your screen resolution is set too high. Try using a different display to set your resolution to 800x600, then attach the MAG display. Adjust from there once it is working...

u will get it on download.com
yeah it is driver problem nothing more
it happened to me too.

If you ask them nicely they just might tell you, else it's only $5 for a user manual(sorry no luck online); http://www.maginnovision.com/service.htm this link has a picture that maybe shows a power cable going to the bottom right (as you look at it) but it's hard to be sure; http://www.amazon.com/gp/product/customer-images/B0002CF06K/ref=cm_ciu_pdp_images_all/104-1966292-9407907?ie=UTF8&s=electronics#gallery this link shows what the power lead should be like - look for a hole that matches; http://cgi.ebay.ca/AC-power-adapter-for-MAG-innovision-lt456s-14-LCD_W0QQitemZ8824271526QQcategoryZ3698QQssPageNameZWDVWQQrdZ1QQcmdZViewItem Hope this helps, if not ask again :)