AFTER FORMATING MY LAPTOP I CAN NOT USE WEB CAMERA, PLEASE GUIDE ME FOR INSTALL WEB CAMERA SETUP ?

Follow this link for your manual, driver, and FAQ's http://www.megxon.com/techsupp/download/X3/X3_supp.htm Driver install 1. Download driver file "X3_Driver.exe" and save it to PC hard disk. 2. This driver file is a self-extracting archive, run it and it will extract automatic. 3. Run "X3 Driver.exe" and will show "WinRAR self-extracting archive" dialog. Press "Install" start extracting. 4. After, in hard disk will create a "X3 Driver" folder. 5. Enter "X3 Driver" folder and find "Install" folder. 6. Enter "Install" folder, find "SETUP.EXE" and run it. The installation wizard will guide you through the installation. -------------------------------------------------------------------------------- How to set the USB function to PC Camera or Storage mode (Regarding how to set the USB function to PC Camera or Storage mode, please reference user manual in page 42.) When connect DSC to PC, it will become a storage device or PC camera depend on the setting of USB in the setup mode. 1. Press the "Manu" button (in the back, left-up side of 5 ways switch) into Menu section. 2. Then press right key to "Setup". 3. Press down key to "USB" then press right key. 4. Press up or down key and change it to "PC camera" or "Storage". 5. Press "OK" key to confirm. -------------------------------------------------------------------------------- How to Format internal memory or memory card (Regarding how to format, please reference user manual page 27. ) > Formatting SD Card Prior to its initial usage, format the SD card. To format the SD card, please insert your compatible SD card into SD slot. Then proceed with the following steps: 1. In "Capture" mode, press "MENU" button into the setting mode. 2. You can see "Capture" and "Setup" in the screen. 3. Press right key to "Setup" then press down key to "Format". 4. Press right key to next step. 5. Press down key to "Confirm". 6. Press "OK" button to confirm. The SD card will be formatted. > Formatting the Internal Memory Take out SD card from the slot and format the Internal Memory by following the above mentioned steps . NOTICE 1. Prior to formatting the SD card, deactivate the ¡§Protect SD card¡¨ function. 2. The internal memory cannot be formatted when the SD card is in the camera.

Hi
I presume that the user guide is supplied and loaded onto the computer during the set up process. If so then, if you haven't already done so, you also need to download and install Adobe Acrobat Reader as the file will almost certainly be in pdf format. Then if you double click on the user guide icon it will open in Adobe Reader. The alternative is that the guide will be in web format, in which case double clicking the file will open it your web browser.

I want to download webcam driver for my sony pcg 9w2m. i cant get my cam working please help me out

Go to this WEB site for details on how to setup a Windows 7 and XP dual boot system -
http://www.techspot.com/guides/143-dual-boot-windows7/

hey,,,,
try to go for restore to last good configuration on the F8 or startup page...
if it works its well and fine...
if not...
u will need a bootable cd of ur OS..
insert ur cd...
and restart your computer...
the system boots via cd rom..
OS setup starts and follow the instruction provided by setup guide...
if u reinstall it might work...
if not then
format ur hdd and install the os..
regards

Dear friend please follow the instruction.
1. Power On your laptop. Put the Web camera
Driver DVD/CD on the DVD/CD player. Run the setup as per your operating system.
3. After a while a your laptop asked you to connect the USB camera. Just connect it .After a while a pop-up message will show "Your web camera is installed & its ready to use."
4. Restart your laptop and Use it. Thanks & waiting for your feedback.

Dear first, make sure you follow the instructions from your camera manufacturer to ensure the proper installation of your camera.

This involves inserting the camera installation CD, being guided through a few steps for installation, and restarting your computer. Plugging in the camera's USB cord at the incorrect time during the camera software installation procedure can cause various problems.

To reinstall your webcam:

Uninstall any existing camera installations. Click "Start," "Settings," "Control Panel," and "Add/Remove Programs." From the list, choose your webcam software and click Remove.

Unplug the camera's USB cord from the computer.

Reboot your computer.

Insert your camera's setup/installation CD.
Follow the instructions described by the camera setup program, and plug in your camera only when prompted. This is usually done after restarting your computer.

Best regard.

Please i lost my installation cd for my web camera soyntec VGA 640/480 web camera. The software usually loads it to my desk top with a TOPRO icon. Please can you help me send the setup to my E mail [email protected] as my system crashed and i had to reload it after i formatted it when it picked up some bad viruses.
best regards
segun

Support Information:
Device Type: Web Camera
Manufacturer: soyntec
Model: VGA 640/480 web camera
Interface: USB
Operating System: Windows XP Professional
Age of Device: Not specified

Go to this site:

http://www.bioticaindia.com/pd1100.html