How to place a conference call please - NorStar T7208 Corded Phone

tip remeber to place the same color back to the same
point it will be easy to buy a new one

You may download the user manual part 1 and part 2. The conference call instructions begin on page 51 of part 2.

I definitely suggest using your conference room table as adining room table because all you need to do is put some placemats and acenterpiece and it morphs into a dining table. I'm not sure that I'd recommend using your dining room table as aconference table because it might look out of place in an office. Also, conference tables tend to have holes inthe center for cords or phones to be plugged in to.

No it can't. One call at least must be dialed out to. Try using a conference bridge service if you want to have multiple parties call in to you. Then you and all guests only need to call bridge number which is usually toll free.

I believe that if you reach a busy signal, you can hang up. The conference should ring you back and the rest of the conference will be there.

Here's what the documentation shows from within the help of a 3300 ICP/MCD...

a 5303 is to be treated just like a 2500 series set...

2500, 5302 IP Phone, SUPERSET 401, SUPERSET 401+, and SUPERSET 4001 telephones:

To form a Conference when a two-party call is already in place, or to add another party to an existing Conference:

1. Press Flash or flash the switchhook.
   

2. Dial the number of the next party.
   

3. Wait for an answer.
   

4. Press Flash or Flash the switchhook.
   

5. Dial the Conference Call Feature Access Code.
   

To Leave a Conference:

• Hang up.
  

2500 telephone:

To split a Conference and speak privately with the original party:

1. Flash the switchhook.
   

2. Dial the Conference Call Split Feature Access code.
   

Make or receive first call.
Press Feature 2 to place call on hold.
Make or receive second call.
Press Feature (star) 3 to establish conference.

Good Luck!

To make a conference call, place your first caller on hold, call your second party (either internal or external) press your conference button or feature 3, and press the line of the person you originally placed on hold

PLease do below listed Steps 1. make call 2. Put first call on Hold and make 2nd call 3. Open Option button and select Conference from menu Note: you need to active conference service from your service provider and also your phone has to supported conference service.. Thanks

$6.50 on amazon for a 10' extension. You may even find it at best buy, you can hook multiple extensions together.

sounds as if you will need your vendor to program your phone and others that need be to have Handsfree/mute capabilities.. i assume since you can not mute then you can not place your phone on Handsfree either.