JVC HD-61Z575 61" Rear Projection HDTV-Ready Television Logo

Related Topics:

Posted on Apr 19, 2008
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

JVC TV lamp indicator light blinking new lamp

I just purhased a new lamp for my JVC it has only been in the TV 3 day and was working fine. Now the TV shuts off about every thirty minutes to and hour and the Lamp indicator light blinks. I can turn the TV back on and a picture shows but then shuts off again like I stated before about every thirty minutes or so. Do I have a bad bulb or is something else broken?

  • Anonymous Apr 05, 2013

    hey i just put a new lamp in my jvc 52 inch tv hd-52G886 and the dam lamp repalcement light keeps blinking really fast and the bulb is good to and the tv wont turn on at all

×

1 Answer

Robert Johnson

Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Sergeant:

An expert that has over 500 points.

  • Expert 395 Answers
  • Posted on Apr 19, 2008
Robert Johnson
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Sergeant:

An expert that has over 500 points.

Joined: Jul 08, 2007
Answers
395
Questions
0
Helped
151998
Points
887

If you purcased a LTI lamp then the possibilty of a bad lamp may be the case. LTI lamps are cheap and are poorly manufactured. if it is a JVC lamp then you may have further problems such as lamp balast, or thermal sensor. clean the fans and filtersfor better air flow. keeping the lanp cool is important for the life of the lamp.

  • Anonymous Jan 20, 2013

    wat is wrong when the sceen wont come on and the red lamp light keeps flashing

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My jvc projection screen tv AV-48WP74 power light blinking, no picture, but wont turn off

u have to unplug it for the light to stop blinking than put new lamp and housing in and it should work just fine after that
0helpful
1answer

TV blue light comes on, then the red light blinks two times, on the 3rd blink, it goes into rapid blinking. I replaced the lamp and it worked for a week, but then the same issue. I put the old lamp back...

some units require a lamp counter reset.the ballast usually starts at extreme output and at certain hour interval the ballast would start to decrease voltage as the bulb ages.to reset on some models can be reset using the remote
0helpful
1answer

Continuous blinks

Change the tv projection lamp inside the tv.The tv projection lamp life cycle has ended.U used this tv every day like 3 or 4 hours wright and the tv been in used for like 3 or 4 years already wright?Yes?Than ur projection lamp has die and it life cycle has ended.Change a new projection lamp for the tv than the tv should work again.
2helpful
1answer

Heard a pop , bulb blew out , replaced bulb , it worked for two days , now red light blinks three times pauses then three times and so on , tv won't turn off light won't turn off unless I unplug...

3 blinks indicates lamp door is not on or has not been reinstalled properly. This also could mean the lamp door switch has failed itself. Try removing the lamp door and putting back on, if that doesnt correct the problem then I recommend having the switch replaced.
0helpful
1answer

Tv tuns self off after a few min. lamp light is blinking.

The tv "LAMP" LED light indication flashing or ligting up?Yes,the tv projection lamp live are over.Tv require a new projection lamp.
0helpful
1answer

Tv comes on for about two minutes then shuts down. The lights stay lit.

Any LED light indicators on the screen panel said "LAMP"stay lit or blinking?The projection lamp life is over,require a new lamp,if "LAMP" LED light lite or blinking?The projection lamp in the tv now,been in use for at leat 2 years and tv on about 4 to 5 hours a day?The Lamp life span is over,require a new lamp.
4helpful
1answer

JVC TV Sleeping

Indicates a power supply failure, needs a few filters replaced expect to pay $100-150 Julio [email protected]
1helpful
1answer

JVC 52 " Rear Projection TV Blinking Lights and no Picture

You need to replace the power supply board. The new ones have a bigger heat sink - obviously JVC knows about the problem because they made the new ones bigger. It cost $250 from JVC and I installed it myself - took about 3 hours to do. If you are not tech savvy call a repairman. Hope this helps.
Not finding what you are looking for?

2,127 views

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

matt martin
matt martin

Level 3 Expert

1259 Answers

 Grubhead
Grubhead

Level 3 Expert

5755 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...