Need to get a diagram to plug in cords from case since no markings on motherboard please email me a wiring diagram for the mother board accer MCP61-SM-AM

go to the web site of board get the manual then check the other case wiring then make the changes you need to make.

Gary,

I don't understand, are you building this board and you want to know where to put the traces???

Did you not receive an instruction manual and software and probably a CD with this new board?

While I am not familiar with this exact device, it is my experience that all connections are standard for the form factor board you have. If your new board is the same form factor as the old, you can only plug it in correctly. If it is a diffrent form factor, you can't plug most stuff, including the power, at all. The sound connector will be marked as will the HD drive activity light and other small conectors. The drives will be IDE or SATA. The floppy connector, if any will be near the IDE, if any.

While I didn't understand your question, if I failed to guess the correct answer, please ask again.

No you need a flashlight magnifing glass / open up the case and on the mother board usually on the bottom right side close to wires to the on switch will be one or mor groups of 6-8 pins with USB clearly marked under them. match them up with the plug as there is a blank if you look close.

on some mother boards there may be a connection in the middle left of the board.. bottom right is the most used.

normally the wires black connectors are marked with white text like PWR SW and PWR LED and stuff and the colors of the wires normally correspondes to the color on the motherboard.....ill look it up and see what i can do for you!

it easy , understand this the white plug with 15 pins in it connect on the mainboard you will see the same size on the mnaiboard and its white too , the grey wires are called IDE 1 and IDE 2 and the ohter one is floppy that one is smaller in size make sure by plug it in too the mainboard look for asmall cut in the plug on the mainboard that is how you find the grey plug in and it go in one side

Hi

If you look closely to the board you will find the pinout written to the motherboard.

Are you sure the model is W5322? Could it be w5233?

Visit this link: http://www.msi.com/index.php?func=downloaddetail&type=manual&maincat_no=1&prod_no=1042
and download the manual for this MB...sodeep

Hi there.
Get a strong flashlight and a magnifying glass (if you have one). On the motherboard look for the front panel, it should be marked PWR and coloured green, also the plug that connects to it should be marked PWR_SW. On some boards there are no colours but the markings are the same, so a good close look.
Have a look at these pictures for an idea >>>>>>




Please post back with the results and any more advice if needed.

Good luck and thanks for choosing FixYa!!

1-Shut down you pc .2-unplug the power cord.3-open the case .4-Find the usb wires trac them back to the board. 5-mark were the wires go with a marker.6-plug new usb port wires in.7-put the case back on pc.8-plug power cord in.9-turn on pc.10-plug your usb device in.

hello my friend here it is the link
http://support.asus.com/download/download.aspx?SLanguage=en-us&model=K8V-MX

to find and to download what you need
it is from asus official site so its secure,its from your mainboard,so just find exactly what tipe of downlaod you need..I suggest the user manual.youll find there the diagram for the case wires.
good luck.talk again if you need something
oh..rank my answer please..;)
thanks..
bye bye