Dvdrw on my advent 7113 will not read any discs

You didn't supply the OS ? Open the device manager, uninstall the DVD rom and Go to the Computer's Manufaturer's website and download the correct driver.

http://www.uktsupport.co.uk/advent/laptop/7113.htm


orhttp://www.google.com.au/url?sa=t&rct=j&q=advent+7113+manual+download&source=web&cd=9&ved=0CHcQFjAI&url=http%3A%2F%2Ftorrentz.eu%2F643a6d0c9bfe0411c3f8e9776446731d05064985&ei=rb0MUKGRJ-ihiAfA1om1DQ&usg=AFQjCNHstgwxBGfgQZ0eiUPUoC6btbLN5Q


hope this helps

All except the bluray ones.

It may the problem of lense inside DVDRW which helps to read the cd if the lense get spoilt the DVDRW wont detect burnt discs

Try playing a CD lens cleaner disk for a couple of minutes.

goto the acer website and lookup your laptop... then look for downloads... you should find the driver listed on there...

I’m happy to assist further over the phone at https://www.6ya.com/expert/norman_d2fa496dce30c65d

Hi,
That sound to me like a defective dvdrw because it can't read the dvd an try to re read and re read and lock the computer until you take it out.

Solution:

Tools:
+ Small screwdriver
-- Small screwdriver

Buy a new or used dvdrw for laptop, first take out the laptop battery. Locate the two screws at bottom of your laptop, take them out, whit a paper clip open the dvdrw from a small hole in front of it, pull the defective dvdrw out, if the front plastic face plate is diferent from yours you can change them using a small - screwdriver (be carefull). If you dvdrw have a smalls canals at sides in your defective dvdrw take them out and put them in the new one two, Install the new dvdrw by slowly pushing in to the dvdrw hole until it take its place, put the two screw drivers back + the battery and you shuold be on your way. Let us know. Obed

hello
I think its broken and its very expensive to bye a new one :S try to look for USB - dvdrw driver to bye. the are pretty good nowdays

you might have bought a blank dvd that is not compatible with your dvdrw.

try to clean your dvdrw first and then try to insert that blank dvd again.

The CDRW/DVDRW has reached it's end of life or it's defective. You'll have to replace it.