Good day.
Have you tried first resoldering the terminals in the circuitry?
Also, try to check for the ABL supply near the flyback. Watch out for the small voltage zener diodes.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Four
blinks - No vertical Deflection (V STOP), Screen goes to a single horizontal
line then the video signal muted. Check IC1509, Q1505 Vertical sweep failure. Check all the solder terminals to vertical output IC. If it do not help, replace that IC.
LED blinks four times on KV series means that the Vertical deflection circuitry encountered a problem. You can repair it yourself if you have knowledge in electronics, knowledgeable in soldering and desoldering of parts on the board.
Hi, 4 blink of power led shows problem in vertical deflection section and most probably vertical output IC is defective, replace it to fix the issue. Regarding .rar file type of service manual files, download winrar software trail version from internet, install it and use it to unzip .rar file to get pdf manual file. You wont get +B volts because tv switch to protection mode and power supply shuts down. Service manual has blinking standby led error code details as well. Thanks.
Hi
In sony tv`s the 4 blink code(sony error codes)usually means that there is a vertical deflection problem.
It is often caused by a faulty vertical output i.c and/or related components.
If you feel handy with a soldering iron let me know and i`ll help you with it.
Hope this help Merry Christmas
My Sony KV-32FS120 blinks 5 times and I can't find a solution.
×