Question about Electrolux Washing Machines

1 Answer

How can I reset my electrolux washing machine afer an E20 error?

I have an electrolux EWF 1282. I got an E20 error at the end of program. Washing was still wet. Took out filter and cleaned. Put filter back. Wanted to start the program again but it just makes a ''humming'' noice as if water is not coming in and program does not start. Technician came out when still under warrenty and he basically reset it. How would I reset the machine. thank you kindly

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

  • Contributor
  • 1 Answer

Turn the dial to off. Press and hold the start pause and the nearest option button. While you're holding them down, turn the dial one notch clockwise.
The machine will beep or flash, let go of the buttons. Release the buttons, then turn the dial slowly, stopping at each click until you get to "off". Now, turn to any setting, then turn to off.

Now, try the machine. If it works, I'm very happy. If not, perhaps someone else can help.
Good Luck

Posted on May 04, 2011

  • mickdraper
    mickdraper Jun 20, 2012

    Just saved me a lot of time and money plus my wife loves me even more now. Washing machine repair guy will even refund my 100 bucks after I shared this tip with him.

  • Anonymous Aug 21, 2017

    I need reset instructions of Electrolux EWF1497 HDW2 please help me..

×

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Electrolux EWF 1282 start pause button is flashing wont start a load have reset it no error messages came up have also cleaned the drain filter the manual way underneath the machine still nothing any


Hello terry_gwen - Based on the symptoms you are describing, you may either have a communication error from the main control board or the timer itself may not be operating correctly. I understand that the filter has been cleaned, however, if you noticed a humming noise, it could either be a clogged drainage hose, or it could possibly have another issue with the door lock assembly. I would personally contact a professional to accurately diagnose the washer to determine the root cause to reduce the risk of unnecessary parts.

Apr 14, 2013 | Electrolux EW1000i Front Load Washer

1 Answer

How do i reset an electrolux 1080


E20 is an error code for a drain pump issue. The error will reset itself if the issue has been resolved. If it or another code continued to appear, then the unit has not been accurately fixed.

Jul 19, 2012 | Electrolux EIFLW55HIW Front Load Washer...

1 Answer

Wat is code for e20 on a ewf 1080


E20 error code measn blocked filter. Removing the blocked filter you have to remove the water from inside by using the small flexible tube which located next to the filter at the right bottom of the machine. Then the only think it still remains was to unscrew and clear the filter.

Hope helps.

Apr 22, 2011 | Electrolux Washing Machines

2 Answers

Hi , I have an elctrolux washing machine, and it stops half way through the cycle 'saying' E20. Does anyone know waht I have to do Thanks RN


E20 is difficulties in draining for washing. which can be drain tube kinked or blocked, drain filter clogged or dirty or the pump impeller behind filter is getting jammed by a coin or cotton or anything wrapped around it, remove filter and look at back of hole and see if impeller will turn use a long screwdriver to turn it, obviously with the power off

May 25, 2010 | Electrolux EW1000i Front Load Washer

3 Answers

Error code E20 electrolux washing machine EW1280F


• E10 = there is no water filling • E20 = the water is not drained • E40 = door open
Download Manual - http://laundry.manualsonline.com/manuals/mfg/electrolux/ew_1280f.html

Feb 04, 2010 | Electrolux Washing Machines

1 Answer

Electrolux EWF 1470 Error code E20


could be the element at fault or pressure chamber

Jan 12, 2010 | Washing Machines

2 Answers

I am having problems with an electrolux 12680 W. PNC 914522501 2007 production yr. It was making a strange sound and not pumping out water. No problem, I removed the front plug and cleaned out around the...


the hose coming from tub to the pump has a filter in it.you need to pull filter out and empty it.E20 means that you have a slow drain,or clog.If the pump is noisier than ussual then you may need to replace pump.but check filter first.

Apr 20, 2009 | Electrolux EW1000i Front Load Washer

6 Answers

Electrolux EWF 1087 error code E60


My Electrolux washer always come up with an error code of E60, Why? can any one help

Mar 07, 2008 | Electrolux EW1200i Front Load Washer /...

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

16,257 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electrolux Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

jimorris77

Level 3 Expert

411 Answers

Poppa Maddo
Poppa Maddo

Level 2 Expert

371 Answers

Are you an Electrolux Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...