- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Bridge the sub in parallel. Connect the positive from one voice coil tithe positive on the other voice coil and then to the positive on the amp for bridge mode. Then do the same to the negative. It will put you at 2 ohm mono in bridge mode.which will give you full power the app can give around 312 watts.
On the laptop, did you "enable" video-output to the DVI port?
Most laptops have 3 modes:
* output only to the internal LCD screen
* output only to the external VGA/DVI/HDMI port
* output to both internal and external ports.
What manufacturer of PC laptop?
What model-number?
The key-sequence for choosing the mode depends on which computer you have.
while it depends on the phone model, but most Samsung phones have 3 options when connected via a USB cable. 1.Media mode 2.Mass Storage 3.PC Studio If you need to work on the memory card(browse file Etc.) then select Mass Storage. MEDIA MODE does the same thing but it also allows you to browse the phone's internal memory. to use PC Studio,you need the CD
go settings then connection mode and select storage mode or pc suite mode then connect it with your pc.If there is still a problem then you cable is damaged change the cable... Plz dont forget to rate
1) As it shows less internal memory, it seems that you have transfered some data like mp3, video clips through bluetooth to this phone and it was saved in the recieved folder which autmatically saves in phone memory. Try saving the data to memory card and you will get the phone memory free.
2) Check the above reason for this same issue.
3) You need to select proper connectivity mode under settings of this phone. Go to settings and then open connectivity folder. Here select the connection mode.
Make sure to install the latest PC suite software on the computer. This can be downloaded from the NOKIA website.
I am in a similar situation. I recently discovered that exact model turntable in our storage room. The Philips 312. While looking it over, I noticed the stylus is broken. I was wondering where you purchased yours?
test resistance of the variable resistor ( rf gain) to make sure the pot is not dry use some electrical lube behind the pot to clean internal connections. pot resistance is stamped on the back.
other than that if your receive is week you have most likely a fault in one of the filters or pll
×