Turning off unnecessary printing instructions

It could be that your cartridges are not aligned. Please follow the steps below to fix your problem:

1. From the printer operator panel, press the Setup button.
2. Go to Maintenance.
3. Select Align Cartridges. Your printer will then print a page to align your cartridges.
4. After the test page is printed, try to print a document again to verify that the problem is fixed.

Should you still need assistance, please leave a comment to my response and I'll get back to you. Should this resolves your problem, your rating will be greatly appreciated.

This could be a driver issue. Try to uninstall the driver this way, refer to this article: How to Uninstall Lexmark Printers. Reboot pc when prompted. When your computer turns on, check if your Windows 7 is running on 32-bit or 64-bit System Type. Go to Start menu -> right-click on Computer -> Properties. Take note of the System Type.
Download and re-install the driver using the links below: - Lexmark X4650 driver for Windows 7 32-bit - Lexmark X4650 driver for Windows 7 64-bit
Execute the file and follow the instructions on your computer screen.

When you installed your printer, you had to install the software on your PC. So go to your PC's start menu, go to Programs, select Lexmark software, select Tools and then select Wifi Configuration Utility. It will open a window which will give you step by step instruction on re-configuring your wifi settings. When you are doing this, make sure your printer is connected to your PC via the USB cable.

remove the cartridge and clean all the contact points on it (not the ink spitting part) and reinsrt it. Use a q-tip and rubbing alcohol.

Hi

Please try to set up again the printer and set it as default printer to correct the driver corrupted.

Please let me know if you need more help. Please rate my solution. Regards

Hi,

It seems that the driver and software has incompatibility issues with your computer's Windows version or Windows might have downloaded and installed an update that caused this problem. I suggest first to visit Lexmark x4650 support & downloads website to download and install appropriate drivers by selecting your windows version (XP, Vista or 7). Remember to uninstall existing software & driver first. If problem persists, contact your printer's manufacturer for assistance.

This is your printer manufacturer's contact details.
http://www1.lexmark.com/content/en_us/about_us/contact_us.shtml

I hope this works for you. Good Luck!

Mongkey
"Understanding explains better..."

Hi,

Have you tried restarting your PC? Once you do this, unplug your printer power cord for a few minutes, uninstall your printer from your computer and reinstall the software. Then plug your power cord back into your printer and try printing your document once more.

Hope this solves your problem.
Best wishes,
Graemevm

Most printers have a no print border roughly 0.6 cm around the page.

You may be able to set the printer to "Edge to Edge printing to get around the no print zone.

Don

give print...select printer ....goto properties of the printer in the same dielog box.....then ....more page layout options .....there you can change the page scaling

Here is how to align your print cartridges

Using the printer control panel:

1 Load plain Letter-size paper.
2 From the printer control panel, press tools , and then press ok.
3 Press the arrow buttons until Align Cartridges appears, and then press ok. An alignment page prints.

Using Windows
1 Load plain Letter-size paper.
2 Do one of the following:
• In Windows Vista, click the windows globe (start button) .
• In Windows XP and earlier, click Start.
3 Click All Programs or Programs, and then select the printer program folder from the list.
4 From the printer folder, click Maintenance Align Cartridges.
5 Click Print.
6 Follow the instructions on the computer screen.

Using Macintosh
1 Load plain Letter-size paper.
2 From the Finder desktop, double-click the printer folder.
3 Double-click the printer utility icon.
4 From the Maintenance tab, click Print Alignment Page.
5 Follow the instructions on the computer screen.
If you aligned the cartridges to improve print