I Pod shows good wireless connection but will not show web pages It is on a BT Home Hub That allows full service on laptop and WII

If your Home Hub is a BT type internet hub, then you can connect the WAN port to the Ethernet port on the Hub.

This means it will go through two routers. One in the Hub and another in the Edimax. The Edimax needs to be configured as a bridge, because you need to keep within the same address range as the BT router. The Edimax DHCP allocation of IP addresses need to be disabled. This is not on the web site.
EDIMAX Technology Official Website Wireless Routers 300Mbps Wireless...

This page will show you where the default password is for all the BT Hubs. Where to find admin password BT Home Hub Help BT com Help If you need to reset the device as the password has been changed then look here How do reset my BT Home Hub to its factory settings Help BT com Help This will change the passwords to what are written on the BT Hub.

Delete the connection from your Android device, select your home-hub and enter the password again. If that doesn't work, try restarting both your tablet and your home hub and try again. If you still have no success, changing the type of security the home hub uses can help.

Have you tried going to device manager in the control panel find your wireless adapter driver and click on update driver? hopefully this will then find a driver update if not you could try the manufacturers web site for the latest driver.

you can also change the BT home hub 2.0(black)encryption type to WEP type. all you need to do is follow the steps to change the type of encryption to WEP.

• connect a computer using the ethernet cable to the hub(its the black cable with yellow leads).
• open an internet explorer or anyother browser, in the address bar just type 192.168.1.254.
• you will be getting the BT home hub manager page with please reset your password, asking for three credentials.
• in the first bar enter the default admin password or the admin password which is found in the wireless card or at the back of the home hub in the label. in the second and third bars enter the password of your own, something like admin1.
• you will be getting another page coming with four options at the top (home, services, settings and troubleshooting).
• click on settings, and below troubleshooting in the blue bar itself , you will see advanced settings. click on it.
• then click on continue to advanced settings, now below home in the blue bar itself, click on wireless.
• after you do that, you will see two options called as configuration and security. click on security. there you will see the option to change the wireless encryption to WEP.after changing the type to WEP, type the same password again in the section for password and click on apply to save changes.
  
• check whether your printer is connecting to your home hub after that,
  

I am a person who work for BT in the tech help desk dept. if you have any trouble in doing this please reply to this message

• 
  

yes, you can. I have my printer connect to my hub and my desktop and I can print from my laptop wirelessly.
You will need your all in one connected via a printer or USB cable to a computer AND also connected to your hub. Then, go to the computer that is connected through a cable to the all in one. Your all in one should have some way to configure its IP address. I have my printer configured as 192.168.1.4 and it's plugged into the 4th port of my hub. Check if this works.

A USB hub may need power. The Wii haves wireless and LAN (USB adapter) internet.

The BT Home Hub is a wireless Internet router distributed by BT. and yes she can connect to the internet.

you need to try
1) check bios aetup screen thereis setting wireless enable/disable
and check xp control panel--system--device manager wireless driver no yellow triangle mark( which need update driver)
2) check wireless switch at laptop frront or right side, set to "on" to make sure the wireless light not on. if wireless indicate light still black means your wireless card out of works, check wireless card by open small back cover clean pins and reinstall it again
3) finally you might need change a wireless card.

uninstall the bt desk top help first then the bt wireless connection , if ur wireless card has an utility use it to configure . the connection might be due the conflict between the wireless software. checked if ur getting limited or no connectivty if so delte and recreate  the wireless profile, if ur using bt router like home hub or voyager go the router page with the ip for hub its 192.168.1.245 and navigate to advance and keep the wireless channel to 9 or 11  for voyager the its 193.168.1.1