I have no disc to install printer. please advise how to install laser printer 1603

Re install the correct driver.

SC 366 - the problem is with the hard disc, it has t many bad sectors, you can try to format the hard disc, but it looks like it will need to be replaced

http://avc-cs.panasonic.net/faq/1033/doc/error/a009.html
go to this page for assistance

You will need to give more information.
What is your problem.
Have you installed the software from the installation disc?
Have you tried an uninstall and then re install?
Have you upgraded your OS?
Have you read and understood the instruction manual?

HI,
This will say the reason and how to overcome it
http://support.microsoft.com/kb/834484

you can download a copy of driver for your printer from here

Click here to Download

This will help. Thanks please keep updated. please do rate the solution positively .Thank you for using Fixya

Regards
Manish

http://www.printcountry.com/drivers/BROTHER_INTELLIFAX_2900_DRIVER_DOWNLOAD.htm
click the link directly and check out the required driver.
thank you.

go to www.ricoh.com, usa, downloads and then select your printer in the drop down windows, lastly choose your operating system. now just unzip the file and install

The following error message appears on the LCD panel on top of the printer after you insert a cartridge: Press enter to align cartridges . You press Enter , but the error message does not go away. The printer will not print. Solution To bypass the cartridge alignment, do the following:

1. Press and hold the Setup button.
2. Press the Options button. The printer should be ready to print.

If the print quality is unacceptable after bypassing alignment, follow the steps below until the error is corrected.

شكرا