Epson Perfection 3170 Flatbed Scanner Logo
Posted on Sep 29, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

The inside of the glass needs to be cleaned. How

The inside of the glass of my Epson 3170 flatbead scanner needs to be cleaned. How do I take the top off to clean it?

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Oct 16, 2012
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Aug 13, 2012
Answers
1
Questions
1
Helped
1737
Points
1

The 3170 has a screw in each of the two slots where the lid inserts into the scanner. Remove the lid, remove these screws, and then the top portion of the scanner with the glass slides forward and off. Mine was stiff getting it off, but with some slight twisting and a bit of force it came off. You can then clean the glass.

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.

  • Master 3,085 Answers
  • Posted on Sep 30, 2009
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

President:

An expert whose answer got voted for 500 times.

Joined: Jun 04, 2009
Answers
3085
Questions
1
Helped
1007118
Points
9738

USUALLY you have to flip them upside and remove 4 screws to split the scanner in half, sometime the screws are hidden under rubber feet on the bottom.

Some just snap together.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Drive belt came off internal spool. How do I remove cover to fix

Press tabs within four corners of the scanner and careful remove the top of the glass scanner
1helpful
1answer

Suddenly doesn't warm up epson 3170 and windows says it is malfunctioning.

Sounds like the bar inside off the scanner isn't working properly, if thats the case then that means the scanner is bad and it would need to be replaced.

Only thing you can try would be to unplug the scanner for about 5 minutes and then plug it back in. Then turn it on and see if it can initialize properly. If it still cant then you know the scanner is bad for sure.


0helpful
1answer

Software available with Perfection 3170 Scanner?

yes this option is inclussive with your epson scan program, learn to play with the different modes of the scanner ex: professional, home mode etc. usually these modes have these options.
0helpful
1answer

Epson Perfection 3170 scanner will not turn on.

having the scanner repaired will cost more than a new one.
1helpful
1answer

Epson Scanner Perfection 3170 can I down load a

Go here

http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&infoType=Doc&oid=25021&prodoid=35836301
19helpful
2answers

How do I clean the inside of the glass on the Epson 3490 Scanner?

Disconnect and remove the lid. Remove the two screws on the back of the base. Then use a screwdriver or flat blade to slightly open the back seam. Beginning at the back, run a blade up inside the upper part of the side seam. You will need to release three catches on each side. Once the sides are loose, raise the back of the top, while pushing forward, and the two snap catches at the front will release. The top then lifts off and you can clean the glass. Reassemble in reverse order.
0helpful
2answers

Scanner glass clean

Cleaning the glass is rather simple. Take the 2 screws under the cover out. Now gently lift the top part of the scanner (some force may be needed). Then the scanner is in 2 parts and the glass can be cleaned inside and outside with a wet wipe glass cleaning pad. Dry the glass with a towel and inspect the glass with a lamp, that no cleanser remains are left. Now install the scanner in reverse order.
0helpful
1answer

3170 Epson scanner. Never a problem before, but

Turned off scanner. Rebooted computer. Turned on scanner again. Works fine now.
Not finding what you are looking for?

1,747 views

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

6688 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

NH TECH

Level 1 Expert

17 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...