Unable to pair a Philips Universal remote with Sansui TV

Check these codes. These are codes by AT8550 universal remote control with Sansui TV. If you want more details and codes, check this. It is very difficult to get a universal remote control which has setup codes with Sansui TVs.

Hello
Philips universal remote control cannot be synchronised with Apex Digital TV. There is no code for Apex with it. There are very rare remote controls which have codes with Apex Digital. Comcast On Demand Custom DVR 3-Device Universal Remote Control is one amoung them. Codes for Apex Digital Tv; with this remote are:
0748, 0765, 0767
Buy this one. It can be sychronised with most of the present devices. OK.

Sounds like problem is with TV. Make sure the remote sensor on the TV is not blocked, it is located at the lower right part of the front of the TV.

Hello

I don't have a code for Sansui TV to be programmed with Sanyo remote control But hava a philips Universal remote model which can be programmed for Sanyo TV and has its codes.

Remote Model ===> Philips CL 034 Universal Remote Controller.
Codes
0115 0632

And herealong with I sends some universal remote codes, that you can check it for.

Four Digit Universal remote code for Sansui TV are

0135 0310

Three digit universal remote code for Sansui TV are

135/ 136

Direct Code Entry

1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

Hi,

Code for Sansui TV are

1247
1191

Please try the above codes
Thanx

Hello,

Using a universal remote for your television, you have to get the correct code to pair up the remote with your television before the remote can start working with your television.

Most of the time you only get wrong codes.

I strongly advice you contact sansui customer care and explain the situation to them, they will further tell you either how you can get your universal remote to work or get you a remote that will work for it.

You can get a sansui HDLCD3210 remote froman electronic shop, i bet that will work for it.

Take care

You can find many universal remote control codes at InsigniaProducts.com, just search for your TV model number and click on the Support Tab.

Me thinks IF you tried the 'code search' function and none worked, I sincerely doubt if any other 'codes' will marry your Philips Remote to your electrohome TV.

This is because your "SEARCH" effort already went through ALL of the possible codes THAT Philips Remote knows and can deliver. It is also possible that a different MODEL of Philips Remote MAY stumble on codes that DO work!

IF you have a 'original' remote, SOME NEWER remotes can LEARN the proper codes from the original remote! BUT you NEED that original remote to send the desired IR data pulses to the smart student remote.

And GOD ~ those TV's are SO OLD, did they even HAVE remotes??

Anthony

Here are some Universal Remote codes for Daewoo TVs:

GE Universal Remote: 0130 0004 0009 0100 0005 0138 0043 0140 0039 0252 0279 0444 0080 0042 0058 0017 0010 0126 0018 0127 0019.
Philips Universal Remote: 0614 0002 0502 0611 0102 0415 0905 0615 0505 0826 0529 0046 0609 0805 0407 0303 0602 0214 0403 0314 0503.
One For All Universal Remote: 0451 1661 0092 0672 0623.
RCA Universal Remote: 1004 1005 1006 1016 1017 1082 1171 1190.
Innovage Universal Remote:004 005 009 017 018 019 042 058 082 085 097 100 126 127 130 138.
Verizon FiOS TV remote 0478 0119 1688 0650 0688 0699.

I lost the remote to my Sansui TV and can't remember the model number. can I get a remote to replace it?, the tv was bought in 2004